GB/T 31018-2014Mobile laboratory—Modular design guide (English PDF)
移动实验室 模块化设计指南
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31018-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 3, 2014
Implementation date
February 1, 2015
Scope
GB/T 31018-2014 is the English-translated version of 移动实验室 模块化设计指南.
GB/T 31018-2014 specifies the terms and definitions used for the modular design of mobile laboratories, together with the design principles, design content, procedures and review requirements.
Clause 1 states that the standard applies to the development and design of all types of mobile laboratory, and no exclusion is stated. Clause 3 defines five terms: module, universal (generalization), modular (modularization), function module and structural module.
Clause 2 cites GB/T 29474-2012, GB/T 29475-2012, GB/T 29477-2012 and GB/T 29600-2012.
The table of contents lists Scope, Normative references, Terms and definitions, Design Principles, Design Content and Design Review, plus one further numbered entry the draft garbles beyond reading, followed by informative Appendix A on domestic and international container shelter dimensions, informative Annex B with an example of the design review file format, and a bibliography.
The draft breaks off at 4.1, where the purposes pursued by modular design are announced but not listed. The standard is held by the national standardization technical committee for mobile laboratories (SAC/TC509), and the page places it at ICS 01.110 and Chinese classification A01. It was issued on 3 September 2014 and has applied since 1 February 2015.
Found what you need?
Document preview — GB/T 31018-2014
National Standard of the People's Republic of China
- ICS
- 01.110
- Classification
- A 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 1 Design Principles
- 5 Designer
- 6 3 Design Content Design Review 5
- Appendix A (informative) domestic and international container shelter Dimensions
- Annex B (informative) Design Review file format (example)
- References
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
This standard specifies the terms and definitions of modular mobile lab, design principles, content, procedures and review requirements.
This standard applies to all types of mobile laboratory development and design.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 29474-2012 Mobile Lab interior materials General technical specifications
GB/T 29475-2012 mobile laboratory design principles and basic requirements
GB/T 29477-2012 Mobile Lab Experiment Module General technical requirements
GB/T 29600-2012 mobile laboratory with temperature and humidity control system specification
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Module
Hard having individual functions, software standards unit, through different forms of composition of the product interfaces with other units, and can be divided, can be combined, interoperable Change, scalable.
3.2 Universal
In each separate system, select and determine the function of a standardized form or size interchangeable subsystems or functional units.
3.3 Modular
Module-based, comprehensive universal, serial, combination of features, standardized form to solve the mobile laboratory rapid response system.
3.4 Modules function
The mobile lab analysis method, the system is divided into units with different functions, modules that perform these functions.
3.5 Structural modules
Based on the relationship between the module in the mobile laboratory system status and modules, grading division, the implementation of these structural levels Module.
4 Design Principles
4.1 Implementation of modular design purposes
Mobile Lab Modular design for the following purposes.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 29474-2012General technical specification for the interior decoration material of mobile laboratory
- GB/T 29475-2012Design principles and basic requirements for mobile laboratory
- GB/T 29477-2012General technical specification for mobile laboratory shelter
- GB/T 29600-2012Technical specification of the temperature and humidity control system for the mobile laboratory
Similar standards
How to Download GB/T 31018-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 29474-2012 — General technical specification for the interior decoration material of mobile laboratory
GB/T 29475-2012 — Design principles and basic requirements for mobile laboratory
GB/T 29477-2012 — General technical specification for mobile laboratory shelter
Secure payment via Stripe
Payments accepted
GB/T 31018-2014
$295.00