GB/T 30914-2014Styrene-isoprene-butadiene rubber (SIBR) - Determination of the microstructure (English PDF)
苯乙烯-异戊二烯-丁二烯橡胶(SIBR)微观结构的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30914-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 8, 2014
Implementation date
December 1, 2014
Scope
GB/T 30914-2014 is the English-translated version of 苯乙烯-异戊二烯-丁二烯橡胶(SIBR)微观结构的测定.
GB/T 30914-2014 is the Chinese standard "Styrene-isoprene-butadiene rubber (SIBR) - Determination of the microstructure". Its scope clause reads: This standard specifies the determination using proton nuclear magnetic resonance spectroscopy styrene - isoprene - butadiene rubber (SIBR) monomer microstructure method.
This standard applies to the determination of the Central African SIBR block styrene, styrene block, the total styrene, 1,2-butadiene structure, 1,4-butadiene knot Structure, 1,2-structure isoprene, isoprene, 1,4-structure isoprene and 3,4-structure content. Its clauses include method summary; reagents; instruments.
Found what you need?
Document preview — GB/T 30914-2014
National Standard of the People's Republic of China
- ICS
- 83.040
- Classification
- G 35
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Method Summary
- 4 Reagents
- 5 Instruments
1 Scope
This standard specifies the determination using proton nuclear magnetic resonance spectroscopy styrene - isoprene - butadiene rubber (SIBR) monomer microstructure method.
This standard applies to the determination of the Central African SIBR block styrene, styrene block, the total styrene, 1,2-butadiene structure, 1,4-butadiene knot
Structure, 1,2-structure isoprene, isoprene, 1,4-structure isoprene and 3,4-structure content.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Determination of matter GB/T 3516-2006 rubber solvent extraction
GB/T 6379.2 measurement methods and results of Accuracy (trueness and precision) - Part 2. Determine the standard measurement method to repeat
Of the basic methods of reproduction
GB/T 15340-2008 natural and synthetic rubber raw sampling and sample preparation method
3 Method Summary
The samples were extracted SIBR was dissolved in deuterated chloroform, under the given parameters, the measured H NMR sample to give
Block structure and the peak area of 1,4 butadiene, 1,2-structure, the structure of 3,4-isoprene, 1,4-structures and 1,2-structure, non-block styrene
Alkenyl peak area. SIBR to determine the structure of different monomers by chemical shift and the integrated area value of protons in different chemical environments content.
4 Reagents
4.1 deuterochloroform (CDCl3)
purity > 99.8%, containing <=0.03% tetramethylsilane (TMS) as the internal standard.
4.2 ethanol - toluene azeotrope (ETA)
anhydrous ethanol and toluene by volume mixing ratio of 7/3.
4.3 acetone
AR.
5 Instruments
5.1 NMR spectrometer
a 400MHz NMR spectrometer or a Fourier transform of the higher frequencies (FT-NMR).
5.2 extractor
comply with GB/T 3516-2006 of.
5.3 vacuum oven
the temperature can be controlled at 50 °C ~ 60 °C; the degree of vacuum < 133Pa.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30914-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30914-2014
$145.00