GB/T 30682-2014Technical specification for water conservation of bath enterprise (English PDF)
洗浴场所节水技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30682-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 22, 2014
Implementation date
July 1, 2015
Scope
GB/T 30682-2014 is the English-translated version of 洗浴场所节水技术规范.
GB/T 30682-2014 is the national water conservation specification for bath enterprises.
Clause 1 states that the standard specifies the terms and definitions relating to water conservation at bathing places together with design requirements, technical requirements and administrative requirements, and that it applies to the operators of bathing places; the same clause adds a case about places that use naturally gushing spring water directly, in wording the draft leaves garbled.
Clause 2 cites GB/T 18870, GB 24789, GB 28378, CJ/T 164 and SB/T 10565.
Clause 3, Terms and Definitions, adopts the definitions of SB/T 10565 and adds four of its own: bath enterprise, which it divides into public service bathing establishments offering showers and pool baths and integrated bathing places combining fitness, entertainment, catering, accommodation and leisure functions in one place; bath water usage, the water used directly in showering, tub bathing, pool bathing, spa, sauna and SPA processes; bath water consumption, the new bathing water consumed, including surface water, groundwater and water obtained from an external hot water or steam supply but excluding circulating water and reclaimed water; and the rate of water supplement, the proportion that the supplementary pool water per unit of time bears to the original pool water.
Clause 4, water-saving design requirements, opens by requiring new, reconstructed and expanded bathing establishments to prepare a water conservation programme and to design, construct and commission the water-saving facilities together with the main project, and 4.2 begins to list what that programme shall contain at the preliminary design stage before the draft breaks off.
The page records the standard as proposed by the Ministry of Water Resources and the National Water Conservation Office and administered by the national water-saving Industry Standardization Technical Committee (SAC/TC442).
It has applied since 1 July 2015; the page gives two different issue dates, so none is stated here.
Found what you need?
Document preview — GB/T 30682-2014
National Standard of the People's Republic of China
- ICS
- 03.100.50
- Classification
- P 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Water-saving design requirements
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
This standard specifies the relevant terms and definitions bathing places water conservation, design requirements, technical and administrative requirements.
This standard applies to operators of bathing places, the direct use of natural spring water gush of water as bathing places available for implementation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 18870 General technical conditions for water-saving products
GB 24789 units of water management and water measuring instruments General
GB 28378 shower water use efficiency and water efficiency rating limit value
CJ/T 164 water-saving domestic water appliances
SB/T 10565 bath industry terminology
3 Terms and Definitions
SB/T 10565 and as defined in the following terms and definitions apply to this document.
3.1 Bathing places
Provide consumers place a shower, tub, pool bath, medicated bath, sauna, spa, SPA and other services. Which provide consumers with a shower and Basic pool bath bathing place called public service bathing establishments; to provide a public bath service-oriented integration of fitness, entertainment, catering and accommodation, Hugh Leisure and other functions in one place called integrated bathing places.
3.2 Bathing water
Shower, bath, pool, spa, sauna, SPA process water directly.
3.3 Bath water withdrawal
New bathing water consumed, including surface water, groundwater, and water obtained from an external hot water, steam, etc., but does not include cycle Water and reclaimed water recycling business.
3.4 Water
Private supplementary sum per unit of time the pool water proportion of the original pool water.
4 Water-saving design requirements
4.1 new, reform, expansion of bathing establishments shall prepare water conservation programs, water-saving facilities with the main project should be designed, constructed and put into operation.
4.2 bath places the preliminary design stage water-saving program should contain the following main elements.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 30682-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
CJ/T 164-2014 — Domestic water saving devices
GB 28378-2019 — Minimum allowable values of water efficiency and water efficiency grades for showers
GB/T 18870-2011 — Technical conditions for water saving products and general regulation for management
Secure payment via Stripe
Payments accepted
GB/T 30682-2014
$85.00