GB/T 3027-2012Marine incandescent illumination lights (English PDF)

1 Scope

This standard specifies the marine incandescent lighting (hereinafter referred to as lamps) requirements, test methods, inspection rules, labeling, packaging and storage

Memory and so on.

This standard applies to the supply voltage AC 250V or less (rated frequency 50Hz or 60Hz) or DC, incandescent light source

Marine lighting.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat

GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db. Damp heat (12h

12h cycle)

GB/T 2423.10-2008 Electrical and Electronic Products Environmental Testing Part 2. Test methods Test Fc. Vibration (sinusoidal)

GB/T 2423.16-2008 Electrical and Electronic Products Environmental Testing Part 2. Test methods Test J and guidance. Mould growth

GB/T 2423.18-2000 Electrical and Electronic Products Environmental Testing Part 2. Test methods - Test Kb. Salt mist, cyclic (chloride

Sodium)

GB 4208-2008 enclosure protection (IP code)

GB 7000.1-2007 Luminaires - Part 1. General requirements and tests

GB/T 17935 screw lampholders

GB/T 17936 Cartridges bayonet

CB/T3852 (all parts) marine lighting type, parameters and main dimensions

3 Requirements