Valid

GB/T 30242-2013General specification for magnetoelectric velocity transducer (English PDF)

磁电式速度传感器通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30242-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

GB/T 30242-2013 is the English-translated version of 磁电式速度传感器通用技术条件.

GB/T 30242-2013 is the Chinese standard "General specification for magnetoelectric velocity transducer". Its scope clause reads: This standard specifies the magnetic speed sensor classification and type designation, requirements, test methods, inspection rules, packaging and storage.

This standard applies to the use of electromagnetic induction principle amount of speed into an electrical signal output of magnetic speed sensor (hereinafter referred to as the sensor Device). Its clauses include classification and model name; requirements.

Found what you need?

Document preview — GB/T 30242-2013

National Standard of the People's Republic of China

ICS
17.080
Classification
N 13

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Categories 1 and type designation
  • 3.1 Category
  • 3.2 Type designation
  • 4 Requirements
  • 4.1 General
  • 4.2 Scope of the technical requirements of
  • 4.3 Operating Conditions
  • 4.4 Technical Requirements
  • 4.4.1 Appearance
  • 4.4.2 mark
  • 4.4.3 Weight
  • 4.4.4 Outline and installation size
  • 4.4.5 output resistance
  • 4.4.6 Insulation Resistance
  • 4.4.7 Insulation strength
  • 4.4.8 Reference sensitivity (when applicable)
  • 4.4.9 Frequency response (when applicable)
  • 4.4.11 transverse sensitivity ratio (when applicable)
  • 4.4.13 output signal frequency (if applicable)
  • 4.4.14 output signal to noise ratio (where applicable)
  • 4.4.15 sensitivity drift over time (if applicable)
  • 4.4.16 output signal frequency drift over time (if applicable)
  • 4.4.17 thermal sensitivity drift (when applicable)
  • 4.4.18 heat output signal frequency drift (when applicable)
  • 4.4.19 temperature storage
  • 4.4.20 cold storage
  • 4.4.21 temperature change
  • 4.4.22 Vibration
  • 4.4.23 Impact
  • 4.4.24 Damp heat
  • 4.4.25 Salt spray
  • 5.1 Test conditions
  • 5.1.1 test environment condition
  • 5.1.2 Arbitration environmental conditions
  • 5.2 Test System
  • 5.3.1 Installation and connection
  • 5.3.2 Place and preheat
  • 5.4 Test
  • 5.4.1 Exterior
  • 5.4.2 mark
  • 5.4.3 Weight
  • 5.4.4 Outline and installation size
  • 5.4.5 Output Resistance
  • 5.4.6 Insulation resistance
  • 5.4.7 Dielectric Strength
  • 5.4.8 Reference sensitivity
  • 5.4.9 Frequency response
  • 5.4.10 amplitude linearity
  • 5.4.11 transverse sensitivity than
  • 5.4.12 Frequency response
  • 5.4.13 output signal frequency
  • 5.4.14 output signal to noise ratio
  • 5.4.15 sensitivity drift over time
  • 5.4.16 output signal frequency drift over time
  • 5.4.17 thermal sensitivity drift
  • 5.4.18 output signal frequency thermal drift
  • 5.4.19 temperature storage
  • 5.4.20 cold storage
  • 5.4.21 temperature change
  • 5.4.22 Vibration
  • 5.4.23 Impact
  • 5.4.24 Damp heat
  • 5.4.25 Salt spray
  • 6 Inspection Rules
  • 6.1 Inspection classification
  • 6.2 factory inspection
  • 6.3 Type inspection
  • 6.3.1 Test principle
  • 6.3.2 Sampling plan and decision rules
  • 7 Packaging and storage
  • 7.1 Packaging
  • 7.2 Storage

1 Scope

This standard specifies the magnetic speed sensor classification and type designation, requirements, test methods, inspection rules, packaging and storage.

This standard applies to the use of electromagnetic induction principle amount of speed into an electrical signal output of magnetic speed sensor (hereinafter referred to as the sensor

Device).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191-2008 Packaging - Pictorial signs

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat

GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test

GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock

GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)

GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt

GB/T 2423.22-2012 Environmental testing - Part 2. Test methods - Test N. Temperature change

GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)

GB/T 7666-2005 and sensor nomenclature codes

GB/T 13384-2008 mechanical and electrical products packaging General technical conditions

3 Classification and model name

3.1 Classification

Magnetic velocity sensor according to the sensed speed types are divided into the amount of magnetic type rotational speed sensor (hereinafter referred to as speed sensor) and magnetic

Electric vibration velocity sensor (hereinafter referred to as vibration velocity sensors).

3.2 Type designation

Sensor model naming should be consistent with the provisions of GB/T 7666-2005 of.

4 Requirements

4.1 General

Shall comply with the technical requirements of the sensor requirements of this standard, a detailed specification of the requirements should not fall below this standard. When the requirements of this standard and detailed

When fine specification requirements inconsistent detail specification shall prevail.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 30242-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30242-2013

$255.00