GB/T 30086-2013Determination of axial coefficient of linear expansion of plastics pipes for water supply (English PDF)
给水塑料管道轴向线膨胀系数试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30086-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 17, 2013
Implementation date
March 1, 2014
Scope
GB/T 30086-2013 is the English-translated version of 给水塑料管道轴向线膨胀系数试验方法.
GB/T 30086-2013 is the Chinese standard "Determination of axial coefficient of linear expansion of plastics pipes for water supply".
Its scope clause reads: This standard specifies the terms and definitions axial water supply plastic pipe linear expansion coefficient test, principle, equipment, sample, test procedure, results Calculation and evaluation and test records and reports.
This standard applies to the jack with a differential measurement of various types of plastic pipe water supply pipe straight axial coefficient of linear expansion. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30086-2013
National Standard of the People's Republic of China
- ICS
- 83.140.30
- Classification
- G 33
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Axial linear expansion coefficient
1 Scope
This standard specifies the terms and definitions axial water supply plastic pipe linear expansion coefficient test, principle, equipment, sample, test procedure, results
Calculation and evaluation and test records and reports.
This standard applies to the jack with a differential measurement of various types of plastic pipe water supply pipe straight axial coefficient of linear expansion.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Determination of GB/T 8806 Plastics piping systems for plastic parts size
QB/T 2803 hard plastic pipe curvature measurement method
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Axial linear expansion coefficient
When the temperature changes by 1 °C, plastic pipe relative change in the axial length.
Principle 4
Free section of plastic pipe expansion at ambient temperature and (or) when the fluid within the pipe temperature changes occur in the axial length dimension
Expansion or contraction.
This method is to use a normal jack differential expansion coefficient tester the sample is uniformly heated, and controlling the temperature rise rate, two temperature measurement
Point between the axial length of the sample variation, calculated linear expansion coefficient.
5 device
Jack differential normal expansion coefficient tester includes a heated water bath, temperature control system, deformation measurement system, and shall meet the following requirements.
a) a thermostat water bath and the temperature control system provides temperature range of ambient temperature of 20 °C ~ 95 °C, maintaining a constant temperature, it
The average temperature not more than ± 0.5 °C, the maximum temperature not more than ± 1.0 °C, can obtain stable heating rate, heating rate
Of 4 °C/10min ± 1 °C/10min, the maximum allowable temperature indication error of ± 0.1 °C;
b) after fixing the pipe specimen should ensure the specimen slide occurred only in the axial direction during the test, there should be no radial displacement and sliding friction
Force should be less than 5N;
The maximum permissible error c) deformation measuring device indication is ± 0.01mm, the contact force and the length-measuring meter should not exceed 1N.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30086-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30086-2013
$85.00