GB/T 29896-2013Method of determining the leachability of wood preservatives from treated wood in soil contact (English PDF)
接触土壤防腐木材的防腐剂流失率测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29896-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 12, 2013
Implementation date
April 11, 2014
Scope
GB/T 29896-2013 is the English-translated version of 接触土壤防腐木材的防腐剂流失率测定方法.
GB/T 29896-2013 is the Chinese standard "Method of determining the leachability of wood preservatives from treated wood in soil contact".
Its scope clause reads: This standard specifies the moist soil in contact with the wood preservative treatment principle, test conditions, test methods for determination of the loss of preservatives, Calculations and test results reporting requirements.
This standard applies to the evaluation of exposure in soil under laboratory conditions (C4A rating) embalmed churn wood preservatives. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29896-2013
National Standard of the People's Republic of China
- ICS
- 79.020
- Classification
- B 60
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 5.1 infusion device
- 5.2 Loss test device
- 5.3 analytical instruments or equipment
1 Scope
This standard specifies the moist soil in contact with the wood preservative treatment principle, test conditions, test methods for determination of the loss of preservatives,
Calculations and test results reporting requirements.
This standard applies to the evaluation of exposure in soil under laboratory conditions (C4A rating) embalmed churn wood preservatives.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 14019-2009 wood preservative term
GB/T 23229-type water-borne wood preservatives Analysis
LY/T 1636 wood preservative use classification and requirements
NY/T 1121 Soil Testing
3 Terms and Definitions
Terms and definitions GB/T 14019-2009 defined apply to this document.
Principle 4
The specifications of the test material must be treated with preservatives, drug reached C4A contact with the soil level. The test material sawn paragraph 2, respectively, as a stream
Loss of samples and a control sample. After the loss of the specimen vertically into the moist soil to keep 12 weeks was taken out and its preservative active ingredient drug
Amount, and with the control sample is compared to the percentage of the loss of wood preservative preservative characterization wastage rate when in contact with the soil.
5 instruments and equipment
5.1 infusion device
Vacuum/pressure impregnation tank vacuum reaches -0.09MPa requires relatively less pressure of 0.8MPa or more.
5.2 Loss test device
Plastic pots or other containers to meet the requirements. A diameter of 17cm ± 1cm, depth of at least 17cm, the bottom left straight
1.6cm diameter holes, can be used to discharge excess water. A small hole with a plug can be used for soil humidity control group.
5.3 analytical instruments or equipment
Water-borne preservatives should have instruments or apparatus GB/T 23229 stipulated. Other preservatives preservative should have the applicable standard
Instrument or device specified.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29896-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29896-2013
$125.00