GB/T 29843-2013General specification for DC electronic load (English PDF)
直流电子负载通用规范
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29843-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 12, 2013
Implementation date
May 1, 2014
Scope
GB/T 29843-2013 is the English-translated version of 直流电子负载通用规范.
GB/T 29843-2013 is the Chinese standard "General specification for DC electronic load". Its scope clause reads: This standard specifies the terms and definitions of DC electronic load, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the input voltage is less than or equal to 600V (DC) DC electronic load. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29843-2013
National Standard of the People's Republic of China
- ICS
- 17.220
- Classification
- L 85
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 5 Test methods
- 6 Inspection Rules
- 7 signs, packaging, transportation and storage
1 Scope
This standard specifies the terms and definitions of DC electronic load, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the input voltage is less than or equal to 600V (DC) DC electronic load.
2 Normative references
The following documents for the application of this document is essential For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB 4208-2008 shell protection (IP code)
GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements
GB 4824-2004 industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
GB/T 6587-2012 General specification for electronic measuring instruments
GB/T 11463 electronic measuring instrument reliability test
GB 17625.1-2012 Electromagnetic compatibility - Limits for harmonic current emissions (equipment input current <=16A)
GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test
GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test
GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test
GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test
GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques Immunity to conducted disturbances induced field
GB/T 17626.11-2008 Electromagnetic compatibility Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity test
GB/T 17626.17-2005 electromagnetic compatibility test and measurement technology dc input power port immunity test ripple
GB/T 19678 specification constitutes preparation, content and presentation methods
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 DC Electronic Load
DC can absorb energy, and converts the absorbed DC power dissipation, feedback or store an electronic circuit device of the grid, the absorbent means
The current size can be adjusted or set, its port input characteristics consistent with Ohm's law.
3.2 Constant current mode
CC mode CCmode
DC electronic load input ports to maintain a constant current drawn by the current value of the set, regardless of the size of the input voltage, as shown in Figure 1
FIG.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29843-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29843-2013
$455.00