GB/T 29727-2013Energy consumption grades of incinerator and curing furnace for CCL (English PDF)
彩色涂层钢带生产线焚烧炉和固化炉能耗分级
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29727-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 18, 2013
Implementation date
January 1, 2014
Scope
GB/T 29727-2013 is the English-translated version of 彩色涂层钢带生产线焚烧炉和固化炉能耗分级.
GB/T 29727-2013 is the Chinese standard "Energy consumption grades of incinerator and curing furnace for CCL". Its scope clause reads: This standard specifies the color coated sheet production line curing oven incinerator and energy terms and definitions, classification energy, determination and calculation method And rounding off and so on.
This standard applies to color coated sheet production line incinerator and curing oven energy rating. Its clauses include terms and definitions; incinerators and curing oven energy rating.
Found what you need?
Document preview — GB/T 29727-2013
National Standard of the People's Republic of China
- Classification
- H 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 incinerators and curing oven energy rating
1 Scope
This standard specifies the color coated sheet production line curing oven incinerator and energy terms and definitions, classification energy, determination and calculation method
And rounding off and so on.
This standard applies to color coated sheet production line incinerator and curing oven energy rating.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 8170 repair value expressed about the rules and limit values and judgment
YB/T 4210 color coated sheet production line incinerator furnaces and thermal balance determination and calculation of solidification
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Color coated sheet production line curing oven typical incinerator and energy typicalenergyconsumptionofincineratorandcu- ringfurnaceforCCL
In the color coated sheet production line, in the YB/T 4210 standard test conditions specified in, the production line design specifications representative of
When the product, the strip after the coating process, the ambient temperature is heated to a state standard curing temperature curing process, the curing oven and incinerator
The consumption of heating energy sum, including electricity, natural gas, liquefied petroleum gas and other energy in one or more, not including power, etc.
Other energy consumption.
3.2
Color coated sheet production line curing oven incinerator and energy consumption per ton typicalenergyconsumptionpertonstripofincin- eratorandcuringfurnaceforCCL
Color coated steel production line, with an average heating energy consumption per 1t typical strip, incinerators and curing oven consumed by Q * represent single
Bit megajoules per tonne (MJ/t).
3.3
Color coated sheet production line incinerator and curing oven energy rating energyconsumptiongradesofincineratorand curingfurnaceforCCL
It represents the color coated sheet production line curing oven incinerator and energy level differences of a hierarchical method, according to the color coated sheet production line
Determine the size of incinerators and energy consumption per ton of curing oven.
4 incinerators and curing oven energy rating
Color coated sheet production line incinerator and curing oven typical power consumption rating as specified in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29727-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29727-2013
$85.00