Valid

GB/T 29626-2019Guide of on-line condition monitoring system for turbine-generator (English PDF)

汽轮发电机状态在线监测系统应用导则

Preview PDF

This is a limited preview

Buy now to download the full PDF (28 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29626-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 18, 2019

Implementation date

May 1, 2020

Scope

GB/T 29626-2019 is the English-translated version of 汽轮发电机状态在线监测系统应用导则.

GB/T 29626-2019 is the Chinese standard "Guide of on-line condition monitoring system for turbine-generator".

Its scope clause reads: This standard specifies the general requirements for on-line monitoring systems for turbo-generators (hereinafter referred to as monitoring systems), online monitoring projects, and Requirements for testing, commissioning and acceptance of online monitoring devices.

This standard applies to the design, manufacture and operation management of the on-line monitoring system for steam turbine generators. Gas turbine generator and camera The status of the online monitoring system can also be referred to. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 29626-2019

National Standard of the People's Republic of China

ICS: 29.160.20
Classification: K 20

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and Definitions
4 General requirements
5 Online monitoring project
6 Test, commissioning and acceptance of online monitoring devices
Appendix A (informative appendix) Generator online monitoring parts and features
Appendix B (informative) Turbo generator online monitoring system integration
Appendix C (informative) Turbo-generator shafting torsional vibration online monitoring system
Appendix D (informative) Insulation overheat monitoring device
Appendix E (informative) Turbogenerator stator winding end vibration monitoring system
Appendix F (informative) Partial discharge online monitoring
Appendix G (informative) On-line monitoring of inter-turn short-circuit of turbine generator rotor windings
Appendix H (informative) Turbogenerator shaft voltage axis current monitoring
Appendix I (informative) Hydrogen leakage monitoring of turbine generator cooling water system

1 Scope

This standard specifies the general requirements for on-line monitoring systems for turbo-generators (hereinafter referred to as monitoring systems), online monitoring projects, and

Requirements for testing, commissioning and acceptance of online monitoring devices.

This standard applies to the design, manufacture and operation management of the on-line monitoring system for steam turbine generators. Gas turbine generator and camera

The status of the online monitoring system can also be referred to.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 2423.1 Environmental testing of electrical and electronic products - Part 2. Test methods Test A. Low temperature

GB/T 2423.2 Environmental testing of electrical and electronic products - Part 2. Test methods Test B. High temperature

GB/T 2423.3 Environmental testing - Part 2. Test method test Cab. constant damp heat test

GB/T 2423.4 Environmental testing of electric and electronic products - Part 2. Test methods Test Db. alternating heat and damp (12h 12h ring)

GB/T 2423.5 Environmental testing - Part 2. Test methods Test Ea and guide. Impact

GB/T 2423.6 Environmental testing for electric and electronic products - Part 2. Test methods Test Eb and guide. Collision

GB/T 2423.10 Environmental testing of electric and electronic products - Part 2. Test Fc. Vibration (sinusoidal)

GB/T 3797 electrical control equipment

GB/T 4208 enclosure protection grade (IP code)

GB/T 17626.2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test

GB/T 17626.3 Electromagnetic compatibility test and measurement technology RF electromagnetic field radiation immunity test

GB/T 17626.4 Electromagnetic compatibility test and measurement technology Electrical fast transient burst immunity test

GB/T 17626.5 Electromagnetic compatibility test and measurement technology Surge (impact) immunity test

GB/T 17626.8 Electromagnetic compatibility test and measurement technology power frequency magnetic field immunity test

GB/T 17799.2 Electromagnetic compatibility general standard immunity test in industrial environment

GB 17799.4 Electromagnetic compatibility general standard emission in industrial environment

GB/T 19183 (all parts) Electronic equipment mechanical structure outdoor enclosure

GB/T 24343 Industrial Machinery Electrical Equipment Insulation Resistance Test Specification

3 Terms and definitions

The following terms and definitions apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 19183

Similar standards

GB/T 26680-2026|GB/T 47963-2026|GB/T 15548-2023|GB/T 43188-2023|GB/T 7894-2023|GB/T 7409.2-2020

How to Download GB/T 29626-2019

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.