GB/T 29618.1-2017Field device tool (FDT) interface specification -- Part 1: Overview and guidance (English PDF)

Foreword

GB/T 29618 "Field Device Tool (FDT) Interface Specification" is divided into the following sections.

--- Part 1. Overview and guidelines;

--- Part 2. Concept and detailed description;

--- Part 301. Communication profile integrated FF field bus specification;

--- Part 302. Communication rules integrated universal industrial agreement;

--- Part 306. Communication rules integrated INTERBUS fieldbus specification;

--- Part 309. Communication profile integrated addressable remote sensor high-speed channel;

--- Part 315. Communication line regulation integrated MODBUS field bus specification;

--- Part 41. Object model lineage integration common object model;

--- Part 42. Object model rules integrated common language infrastructure;

--- Part 515. Common object model communication to achieve MODBUS field bus specification;

--- Part 51-10. Common Object Model Communication to achieve FF Fieldbus Specification;

--- Part 51-20. Common object model of communication to achieve universal industrial agreement;

Part 51-60. General object model communication to achieve INTERBUS fieldbus specification;

--- Part 51-90. Common object model of communication to achieve IEC 61784CPF9;

--- Part 51-150. Common object model of communication to achieve IEC 61784CPF15;

--- Part 52-10. General language infrastructure to achieve communication FF fieldbus specification;

--- Part 52-20. Common language infrastructure to achieve universal industrial communication protocol;

--- Part 52-31. Communication of the common language infrastructure IEC 61784CP3/1 and CP3/2;

--- Part 52-32. Communication of common language infrastructure IEC 61784CP3/4, CP3/5 and CP3/6;

--- Part 52-90. Communication of common language infrastructure IEC 61784CPF9;

--- Part 52-150 of the General Language Infrastructure Communication IEC 61784CPF15;

--- Part 61. Generic object model device type manager style guide;

--- Part 62. Field Device Tool (FDT) common language infrastructure style guide.

This section GB/T 29618 Part 1.

This section drafted in accordance with GB/T 1.1-2009 given rules.

This Part replaces GB/T 29618.1-2013 "Field Device Tool (FDT) Interface Specification Part 1. Overview and Guidelines", the Department

Points and GB/T 29618.1-2013 compared to editorial changes in addition to the main technical changes are as follows.

--- Added the terms "generic DTM" (see 3.1.26), "Interpretation DTM" (see 3.1.31);

--- Added "DTM can be used as a specific DTM or generic DTM. A specific DTM is for a specific device or a series

developing. Universal DTMs support a device profile or device that integrates device descriptions (such as DD or FDI device packages)

Prepare "(see 4.3.3,.2013 version 4.3.3);

--- Added "Part 42. Object Model Rules Integrate Common Language Infrastructure;" "Part 62. Field Device Tools

(FDT) Generic Language Infrastructure Style Guide "(see 5.1);

--- Change the representation (see 5.1,.2013 version 5.1);

--- Added "Object Model Integration Profile --- Common Language Infrastructure (CLI)" (see 5.4.3);

--- Added IEC 62769 Field Device Integration (FDI) concepts and reviews. Field device description based on EDDL device package

(IEC 61804-4 and 61804-4) and optional programmable graphical user interface (compatible with IEC 62453-42). Device package

In a integrated client-server architecture. An optional, OPCUA (IEC 62541) service is available

The information model of the interface of the device (see Table 1, Table 1 of the.2013 edition).

This section uses the translation method identical with IEC 62453-1.2016 "Field Device Tool (FDT) Interface Specification Part 1. Overview and

Guidelines".

The documents of our country that are consistent with the corresponding international documents that are normative references in this section are as follows.

--- GB/T 16657.2-2008 Industrial Communication Network Fieldbus Specification Part 2. Physical layer specification and service definition

(IEC 61158-2.2007, IDT);

--- GB/T 20540.1-2006 measurement and control of digital data communications industrial control system with fieldbus type 3.PRO-

FIBUS Specifications Part 1. Overview and Guidance (IEC 61158-1 Type 3..2003, MOD);

--- GB/T 20540.2-2006 Measurement and control of digital data communications fieldbus type for industrial control systems 3.PRO-

FIBUS Specifications Part 2 Physical Layer Specifications and Service Definition (IEC 61158-2Type3.2003, MOD);

--- GB/T 20540.3-2006 Measurement and control of digital data communications fieldbus type for industrial control systems 3.PRO-

FIBUS Specifications Part 3. Data Link Layer Service Definition (IEC 61158-3 Type 3..2003, MOD);

--- GB/T 20540.4-2006 Measurement and control of digital data communications fieldbus type for industrial control systems 3.PRO-

FIBUS Specifications Part 4. Data Link Layer Protocol Specifications (IEC 61158-4 Type 3..2003, MOD);

--- GB/T 20540.5-2006 Measurement and control of digital data communications Industrial control systems with field bus type 3.PRO-

FIBUS Specifications Part 5. Application Layer Service Definition (IEC 61158-5 Type 3..2003, MOD);

--- GB/T 20540.6-2006 Measurement and control of digital data communications fieldbus type for industrial control systems 3.PRO-

FIBUS Specifications Part 6. Application Layer Protocol Specifications (IEC 61158-6 Type 3..2003, MOD);

Measurement and control of digital data communications - Fieldbus type 10 for industrial control systems.

PROFINET Specification Part 1. Application Layer Service Definition (IEC 61158-5 TYPE 10.2003, MOD);

Measurement and control of digital data communications - Fieldbus type 10 for industrial control systems.

PROFINET Specification Part 2. Application Layer Protocol Specifications (IEC 61158-6 TYPE 10.2003, MOD);

--- GB/T 20830-2015 Functional safety based on PROFIBUSDP and PROFINETIO Communication rules ---

PROFIsafe (IEC 61784-3-3.2010, IDT);

--- GB/T 25105.1-2014 Industrial Communication Network Fieldbus Specification Type 10.PROFINETIO Specification No. 1

Part. Application layer service definition (IEC 61158-5-10.2010, MOD);

--- GB/T 25105.2-2014 Industrial Communication Network Fieldbus specification type 10.PROFINETIO norms 2

Part. Application layer protocol specification (IEC 61158-6-10.2010, MOD);

--- GB/T 25105.3-2014 Industrial Communication Network Fieldbus specification type 10.PROFINETIO norms 3

Part. PROFINETIO Communication Profile (IEC 61784-2.2010, MOD);

--- GB /Z 26157.1-2010 Measurement and Control Digital Data Communication Fieldbus Type for Industrial Control Systems 2.Con-

trolNet and EtherNet/IP Specification Part 1 General Description (IEC 61158.2003 TYPE2, MOD);

--- GB /Z 26157.2-2010 Measurement and Control Digital Data Communication Fieldbus Type for Industrial Control Systems 2.Con-

trolNet and EtherNet/IP Specifications Part 2. Physical Layers and Media (IEC 61158-2.2003 TYPE2, MOD);

--- GB /Z 26157.3-2010 Measurement and Control Digital Data Communication Fieldbus Type for Industrial Control Systems 2.Con-

trolNet and EtherNet/IP specifications Part 3. Data link layer (IEC 61158-2003 TYPE2, MOD);

--- GB /Z 26157.4-2010 Measurement and Control Digital Data Communication Fieldbus Type for Industrial Control Systems 2.Con-

trolNet and EtherNet/IP specifications - Part 4. Network and transport layers (IEC 61158-2003 TYPE 2, MOD);

--- GB /Z 26157.5-2010 Measurement and Control Digital Data Communication Industrial Control Systems Fieldbus Type 2.Con-

trolNet and EtherNet/IP Specification Part 5. Data Management (IEC 61158-2003 TYPE2, MOD);

--- GB /Z 26157.6-2010 Measurement and Control Digital Data Communication Industrial Control Systems Fieldbus Type 2.Con-

trolNet and EtherNet/IP specifications - Part 6. Object model (IEC 61158-2003 TYPE2, MOD);

--- GB /Z 26157.7-2010 Measurement and control of digital data communications Industrial Control Systems Fieldbus Type 2.Con-

trolNet and EtherNet/IP Specifications Part 7. Device Profile (IEC 61158-2003 TYPE 2, MOD);

--- GB /Z 26157.8-2010 Measurement and Control Digital Data Communication Fieldbus Type for Industrial Control Systems 2.Con-

trolNet and EtherNet/IP Specifications Part 8. Spreadsheets (IEC 61158.2003 TYPE2, MOD);

--- GB /Z 26157.9-2010 Measurement and Control Digital Data Communication Fieldbus Type for Industrial Control Systems 2.Con-

trolNet and EtherNet/IP Specification Part 9. Station Management (IEC 61158-2003 TYPE2, MOD);

--- GB /Z 26157.10-2010 Measurement and control of digital data communications Industrial Control Systems Fieldbus Type 2.Con-

trolNet and EtherNet/IP Specification Part 10. Object Library (IEC 61158.2003 TYPE2, MOD);

--- GB/T 29910.3-2013 Industrial Communication Network Fieldbus Specification Type 20.HART Code Part 3. Should

Service-level definition (IEC 61158-5-20.2010, IDT);

--- GB/T 29910.4-2013 Industrial Communication Network Fieldbus Specification Type 20.HART Code Part 4. Should

Layer protocol specification (IEC 61158-6-20.2010, IDT);

--- GB /Z 29619.1-2013 Measurement and Control Digital Data Communication Fieldbus Type for Industrial Control Systems 8.IN-

TERBUS Specification Part 1. Overview (IEC 61158.2003, MOD);

--- GB /Z 29619.2-2013 Measurement and Control Digital Data Communication Fieldbus Type for Industrial Control Systems 8.IN-

TERBUS specification Part 2. Physical layer specification and service definition (IEC 61158.2003, MOD);

--- GB /Z 29619.3-2013 Measurement and Control Digital Data Communications Fieldbus Type for Industrial Control Systems 8.IN-

TERBUS specification - Part 3. Data link service definition (IEC 61158-2003, MOD);

--- GB /Z 29619.4-2013 Measurement and Control Digital Data Communication Fieldbus Type for Industrial Control Systems 8.IN-

TERBUS Specification Part 4. Data Link Protocol Specification (IEC 61158-2003, MOD);

--- GB /Z 29619.5-2013 Measurement and Control Digital Data Communications Fieldbus Type for Industrial Control Systems 8.IN-

TERBUS specification - Part 5. Definition of application layer services (IEC 61158-2003, MOD);

--- GB /Z 29619.6-2013 Measurement and Control Digital Data Communication Fieldbus Type for Industrial Control Systems 8.IN-

TERBUS specification Part 6. Application layer protocol specification (IEC 61158.2003, MOD);

The following editorial changes have been made to IEC 62453-1.2016 according to GB/T 1.1-2009.

--- Remove the IEC 62453-1.2016 in 5.4.3 "IEC /T R62453-42 informative and yetforeaTR."

This part is proposed by China Machinery Industry Federation.

This part of the National Industrial Process Measurement Control and Automation Standardization Technical Committee (SAC/TC124) centralized.

This part of the drafting unit. Southwest University, Machinery Industry Instrumentation Technology Institute of Economics, Shanghai Automation Instrumentation Co., Ltd.,

Chongqing Chuan Yi Automation Co., Ltd., Rockwell Automation (China) Co., Ltd., Zhejiang University Institute of Intelligent Systems and Control,

(Shanghai) Automation System Trading Co., Ltd., Schneider Electric (China) Co., Ltd., Suzhou Mei Ming Software Co., Ltd.

Introduction

Enterprise Automation requires two main streams of data. a "vertical" stream of data including signal and configuration data from the enterprise layer to the field devices;

"Horizontal" communication between field devices running on the same or different communication technologies.

With the control system's fieldbus integration, many other tasks need to be implemented. In addition to fieldbus and device-specific software tools,

There is also a need for tools that can be integrated into higher-level, system-wide, planning or engineering tools. Especially in large, heterogeneous control

System, example. The typical process industry area is easy to use for all parties (personnel) and the unambiguous definition of an engineering interface is very heavy

need.

From the perspective of the system life cycle and the entire factory automation, if you have to use a number of different manufacturers of specific tools, then this

The data in these tools often becomes invisible data silos.

To ensure consistent plant-wide control and automation technology, seamless integration of fieldbusses, devices and subsystems into

Part of a wide range of automation tasks covering the entire automation life cycle is necessary.

The GB/T 29618 series of standards provide interface specifications for developers of FDT (Field Device Tools) components. FDT component is supported

Functional Control and Data Access Under Client/Server Architecture. Standard interfaces help multiple manufacturers develop servers and clients

And support for interoperability.

Device or module-specific software components are called DTMs (Device Type Manager). DTM provided by the manufacturer, with the appropriate equipment

Type or type of software entity. Each DTM can be integrated into the engineering tool via the defined FDT interface. This integration method is

Open to all fieldbus, thus supporting the integration of different devices and software modules into heterogeneous control systems.

GB/T 29618 series of standard universal application interface to support application developers, system integrators, field devices and network component manufacturers

Benefits also streamline sourcing, reduce system costs and help manage the lifecycle. Available in control system operation, engineering and maintenance

Savings.

GB/T 29618 series of standards is to support.

* For heterogeneous fieldbus environments in all automation areas (eg process automation, factory automation and similar monitoring applications)

Common plant-level tools for multi-manufacturer lifecycle management of equipment, function blocks, and modular subsystems;

* Complete and consistent data exchange within the control system including fieldbus, equipment, function blocks and modular subsystems;

* Simple and effective integration of different automation devices, function blocks and modular subsystem components into the control system's lifecycle manager

With, this integration has nothing to do with the manufacturer.

The FDT concept supports the design and integration of monitoring applications, but not for other engineering tasks such as "electronic wiring design" "mechanical design"

For solution. Plant management content such as "Maintenance Planning" "Optimized Control" "Data Archive" is not a part of the FDT specification. Future FDT version

This may include some of them.

Field Device Tool (FDT) Interface Specification

Part 1. Overview and guidelines

1 Scope

This section GB/T 29618 specifies the GB/T 29618 series overview and guidelines, including.

--- Explain the GB/T 29618 series structure and content (see Chapter 5);

--- Provides a number of other common parts of the GB/T 29618 series of some instructions;

--- Describe the GB/T 29618 series of other parts of the relationship.

This section applies to GB/T 29618 series of other parts.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

IEC 61158 (all parts) Digital data communication in measurement and control Industrial Control Systems Fieldbus (Fieldbusforuse

inindustrialcontrolsystems)

IEC 61784 (all parts) Industrial communication networks - Industrial rules (Industrialcommunicationnetworks-Profiles)

3 Terms and definitions, symbols and abbreviations, conventions