GB/T 29618.5231-2018Field device tool (FDT) interface specification -- Part 5231: Communication implementation for common language infrastructure -- IEC 61784 CP 3/1 and CP 3/2 (English PDF)
现场设备工具(FDT)接口规范 第5231部分：通用语言基础结构的通信实现 IEC 61784 CP3/1和CP3/2
This is a limited preview
Buy now to download the full PDF (104 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29618.5231-2018 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
September 17, 2018
Implementation date
April 1, 2019
Scope
GB/T 29618.5231-2018 is the English-translated version of 现场设备工具(FDT)接口规范 第5231部分：通用语言基础结构的通信实现 IEC 61784 CP3/1和CP3/2.
GB/T 29618.5231-2018 is the Chinese standard "Field device tool (FDT) interface specification -- Part 5231: Communication implementation for common language infrastructure -- IEC 61784 CP 3/1 and CP 3/2".
Its scope clause reads: This part of GB/T 29618 provides the integration of fieldbus technology into a CLI-based implementation of the FDT interface specification.
Information in (GB/T 29618.42). This section specifies communication implementations and other services based on IEC 62453-303-1. This section does not contain the FDT specification and does not modify it. Its clauses include terms, definitions, symbols, abbreviations and conventions.
Found what you need?
Document preview — GB/T 29618.5231-2018
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 10
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, definitions, symbols, abbreviations and conventions
- 3.1 Terms and Definitions
- 3.2 Symbols and abbreviations
- 3.3 Convention
- 3.3.1 Data Type Name and Reference Data Type
- 3.3.2 Vocabulary requirements
- 3.3.3 UML use
- 4 bus category
- 5 Accessing instance and device data
- 5.1 Overview
- 5.2 IO signal provided by DTM
- 5.3 Data Interface
- 5.3.1 Overview
- 5.3.2 Mapping of PROFIBUS data types to FDT data types
- 5.3.3 Semantic Information
- 6 Protocol Specific Behavior
- 6.1 PROFIBUS device model
- 6.2 Configuration and parameterization of PROFIBUS devices
- 6.2.1 Overview
- 6.2.2 Monolithic DTM 7 for modular PROFIBUS equipment
- 6.2.3 Composite DTM 7 for modular PROFIBUS devices
- 6.3 DP-V0 Configuration Support
- 6.4 PROFIBUS slave station running without class1 PROFIBUS master station
- 6.5 PROFIBUS related information of the slave DTM
- 6.5.1 Overview
- 6.5.2 PROFIBUS Network Data (PND)
- 6.5.3 GSD Information
- 6.5.4 Process Data Item
- 7 Protocol-specific usage of generic data types
- 7.1 General Data Type
- 7.2 Protocol Specific Processing for Data Type STRING
- 8 Network Management Data Type
- 8.1 Overview
- 8.2 Configuration
- 8.3 Process Data Item
- 8.4 Parameterization
- 9 Communication data type
- 9.1 Overview
- 9.2 ProfibusAbortMessage
- 9.3 DP-V0 communication
- 9.3.1 Overview
- 9.3.2 Dpv0ConnectRequest
- 9.3.3 Dpv0ConnectResponse
- 9.3.4 Dpv0DisconnectRequest
- 9.3.5 Dpv0DisconnectResponse
- 9.3.6 Dpv0TransactionRequest
- 9.3.7 Dpv0TransactionResponse
- 9.4 DP-V1 communication
- 9.4.1 Dpv1ConnectRequest
- 9.4.2 Dpv1ConnectResponse
- 9.4.3 Dpv1DisconnectRequest
- 9.4.4 Dpv1DisconnectResponse
- 9.4.5 Dpv1TransactionRequest
- 9.4.6 Dpv1TransactionResponse
- 9.5 Error Messages Provided by the Communication Channel
- 10 Data type of process data information
- 10.1 Overview
- 10.2 ProfibusIOSignalInfo
- 11 Device Identification
- 11.1 Overview
- 11.2 ProfibusDeviceScanInfo data type
- 11.2.1 Overview
- 11.2.2 Data Type Derived from ProfibusBaseScanInfo
- 11.3 ProfibusDeviceIdentInfo data type
- 11.3.1 Overview
- 11.3.2 Data type derived from ProfibusBaseIdentInfo
- 11.4 Mapping of Information Sources
1 Scope
This part of GB/T 29618 provides the integration of fieldbus technology into a CLI-based implementation of the FDT interface specification.
Information in (GB/T 29618.42).
This section specifies communication implementations and other services based on IEC 62453-303-1.
This section does not contain the FDT specification and does not modify it.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 29618.1-2017 Field Device Tool (FDT) Interface Specification Part 1. Overview and Guidelines (IEC 62453-1.
2016, IDT)
GB/T 29618.2-2017 Field device tool (FDT) interface specification Part 2. Concepts and detailed description (IEC 62453-2.
2016, IDT)
GB/T 29618.42-2017 Field Device Tool (FDT) Interface Specification Part 42. Object Model Profile Integration Common Language
Infrastructure (IEC /T R62453-42..2016, IDT)
IEC 61131-3.2003 Programmable Controller Part 3. Programming Language (Programmablecontroler-Part 3.
Programminglanguage)
IEC 61158 (all parts) Industrial Communication Network Fieldbus Specification (Industrialcommunicationnetworks-
Fieldbusspecifications)
IEC 61158-6-3.2014 Industrial Communication Network Fieldbus Specification Part 6-3. Application Layer Protocol Specification Type 3 (Industrialcommunicationnetworks-Fieldbusspecifications-Part 6-3. Applicationlayerprotocol specification-Type3elements)
IEC 61784-1.2014 Industrial Communication Network Profiles Part 1. Fieldbus Profiles (Industrialcommunication networks-Profiles-Part 1. Fieldbusprofiles)
IEC 62453-303-1.2009 Field Device Tool (FDT) Interface Specification Part 303-1. Communication Protocol Integration IEC 61784
CP3/1andCP3/2[Fielddevicetool(FDT)interfacespecifications-Part 303-1.Communication
Profileintegration-IEC 61784CP3/1andCP3/2]
IEC 62453-303-1.2009/AMD1.2016
3 Terms, definitions, symbols, abbreviations and conventions
3.1 Terms and definitions
GB/T 29618.1-2017, GB/T 29618.2-2017, GB/T 29618.42-2017 and IEC 62453-303-1
GB/T 33009.2 | GB/T 33009.1 | GB/T 33008.1 | GB/T 29618.3032 | GB/T 29618.3031 | GB/T 29618.5215 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 104 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 29618.1-2017Field device tool (FDT) interface specification -- Part 1: Overview and guidance
- GB/T 29618.2-2017Field device tool (FDT) interface specification -- Part 2: Concepts and detailed description
- GB/T 29618.42-2017Field device tool (FDT) interface specification -- Part 42: Object model integration profile -- Common language infrastructure
IEC 62453 · IEC 61131 · IEC 61158 · IEC 61784
How to Download GB/T 29618.5231-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 29618.1-2017 — Field device tool (FDT) interface specification -- Part 1: Overview and guidance
GB/T 29618.2-2017 — Field device tool (FDT) interface specification -- Part 2: Concepts and detailed description
GB/T 29618.42-2017 — Field device tool (FDT) interface specification -- Part 42: Object model integration profile -- Common language infrastructure
Secure payment via Stripe
Payments accepted
GB/T 29618.5231-2018
$710.00