GB/T 29618.301-2015Field device tool (FDT) interface specification—Part 301: Communication profile integration—FF fieldbus specification (English PDF)
现场设备工具（FDT）接口规范 第301部分：通信行规集成 FF现场总线规范
This is a limited preview
Buy now to download the full PDF (97 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29618.301-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 10, 2015
Implementation date
July 1, 2016
Scope
GB/T 29618.301-2015 is the English-translated version of 现场设备工具（FDT）接口规范 第301部分：通信行规集成 FF现场总线规范.
GB/T 29618.301-2015 is the Chinese standard "Field device tool (FDT) interface specification—Part 301: Communication profile integration—FF fieldbus specification".
Its scope clause reads: Communication profiles cluster 1 (FF1) in accordance with IEC 61158-2 Type 1, IEC 61158-3-1, IEC 61158-4-1, IEC 61158-5-5, IEC 61158-5-9, IEC 61158-6-5 and IEC 61158-6-9 defines the communication profile.
Defines the basic protocol IEC 61784-1 CP1/1 (FFH1) and CP1/2 (FFHSE). This section FF protocol integrated into the FDT standard (GB/T 29618.2) to provide information.
These standards describe the definition of the communication protocol-specific extensions, and a block (eg, transmission block, resource block or function block) representation.
The new protocol-specific definition is based on the protocol specification FFH1 and HSE. In addition, the definition includes system FF device configuration The required information. This section applies to a specific definition of FF devices and systems.
Found what you need?
Document preview — GB/T 29618.301-2015
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, definitions, symbols, abbreviations and conventions
- 3.1 Terms and definitions
- 3.2 Symbols and abbreviations
- 3.3 Conventions
- 4.1 system topology and FDT
- 4.2 H1 FDT topology device
- 4.4 nested distribution
- 6.1 DTM
- 6.2 BTM
- 7 protocol-specific behavior
- 7.1 Connection Management
- 7.2 Abort
- 7.4 subscribe mechanism
- 8 General protocol-specific data types use
- 8.1 Address
- 8.2 protocolID
- 8.3 applicationDomain
- 8.4 semanticId
- 9 protocol-specific data types
- 9.1 DTM
- 9.2 BTM
- 10 Network Management Data Types
- 10.1 Overview
- 10.2 H1 network management defined
- 10.3 HSE management network defined
- 11 communication data type
- 11.1 General Data Type
- 11.2 FFFMS data type
- 11.3 H1 communication data type
- 11.4 HSE communication data type
- 11.5 FDTFF standard block communication data type
- 13 device identification
- 13.1 Data type STRING protocol specific processing
- 13.2 common type of device identification data type
- 13.3 scanning identification data type
- 13.4 Equipment type identification data type -DTM provide
- Appendix A (informative) to achieve prompt
- Appendix B (normative) level of support
- References
1 Scope
Communication profiles cluster 1 (FF1) in accordance with IEC 61158-2 Type 1, IEC 61158-3-1, IEC 61158-4-1, IEC 61158-5-5,
IEC 61158-5-9, IEC 61158-6-5 and IEC 61158-6-9 defines the communication profile. Defines the basic protocol IEC 61784-1
CP1/1 (FFH1) and CP1/2 (FFHSE).
This section FF protocol integrated into the FDT standard (GB/T 29618.2) to provide information.
These standards describe the definition of the communication protocol-specific extensions, and a block (eg, transmission block, resource block or function block) representation.
The new protocol-specific definition is based on the protocol specification FFH1 and HSE. In addition, the definition includes system FF device configuration
The required information.
This section applies to a specific definition of FF devices and systems.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 29618.1-2013 Field device tool (FDT) interface specification - Part 1. General and guidance (IEC 62453-1.2009, IDT)
GB/T 29618.2-2013 Field device tool (FDT) interface specification - Part 2. Concepts and detailed description (IEC 62453-2.
2009, IDT)
ISO 646 ISO information technology for information exchange 7 coded character set (ISO 646Informationtechnology-
ISO 7-bitcodedcharactersetforinformationinterchange)
IEC 61158-2 Industrial communication networks - Fieldbus specifications - Part 2. Physical layer specification and service definition (IEC 61158-2In- dustrialcommunicationnetworks-Fieldbusspecifications-Part 2. Physicallayerspecificationand servicedefinition)
IEC 61158-3-1 Industrial communication networks - Fieldbus specifications - Part 3-1. Data link layer service definition - Type 1 elements (IEC 61158-3-1Industrialcommunicationnetworks-Fieldbusspecifications-Part 3-1. Data-link layerservicedefinition-Type1elements)
IEC 61158-4-1.2007 Industrial communication networks - Fieldbus Regulations - Part 4-1. Data link layer protocol specification Class 1 yuan
Su (IEC 61158-4-1.2007Industrialcommunicationnetworks-Fieldbusspecifications-Part 4-1Data- linklayerprotocolspecification-Type1elements)
IEC 61158-5-5 Industrial communication networks - Fieldbus specifications - Part 5-5. Application layer service definition class 5 Elements (IEC 61158-5-5Industrialcommunicationnetworks-Fieldbusspecifications-Part 5-5. Application layerservicedefinition-Type5elements)
IEC 61158-5-9 Industrial communication networks - Fieldbus specifications - Part 5-9. Application layer service definition ninth element (IEC 61158-5-9Industrialcommunicationnetworks-Fieldbusspecifications-Part 5-9. Application layerservicedefinition-Type9elements) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 97 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 29618.1-2013Field device tool (FDT) interface specification -- Part 1: Overview and guidance
- GB/T 29618.2-2013Field device tool (FDT) interface specification -- Part 2: Concepts and detailed description
ISO 646 · IEC 61158-2 · IEC 61158-3-1 · IEC 61158-4-1:2007 · IEC 61158-5-5 · IEC 61158-5-9 · IEC 61784
Similar standards
How to Download GB/T 29618.301-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 29618.302-2013 — Field device tool (FDT) interface specification -- Part 302: Communication profile integration -- Common industrial protocol
GB/T 29618.62-2017 — Field device tool (FDT) interface specification -- Part 62: Field device tool (FDT) style guide
GB/T 29618.306-2017 — Field device tool (FDT) interface specification -- Part 306: Communication profile integration -- INTERBUS
Secure payment via Stripe
Payments accepted
GB/T 29618.301-2015
$1,650.00