Valid

GB/T 29618.5232-2018Field device tool (FDT) interface specification -- Part 5232: Communication implementation for common language infrastructure -- IEC 61784 CP 3/4, CP 3/5 and CP 3/6 (English PDF)

现场设备工具(FDT)接口规范第5232部分：通用语言基础结构的通信实现 IEC 61784 CP3/4、CP3/5和CP3/6

Preview PDF

This is a limited preview

Buy now to download the full PDF (98 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29618.5232-2018 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

September 17, 2018

Implementation date

April 1, 2019

Scope

GB/T 29618.5232-2018 is the English-translated version of 现场设备工具(FDT)接口规范第5232部分：通用语言基础结构的通信实现 IEC 61784 CP3/4、CP3/5和CP3/6.

GB/T 29618.5232-2018 is the Chinese standard "Field device tool (FDT) interface specification -- Part 5232: Communication implementation for common language infrastructure -- IEC 61784 CP 3/4, CP 3/5 and CP 3/6".

Its scope clause reads: This part of GB/T 29618 provides the integration of PROFINET􀆿1) technology into a CLI-based implementation of the FDT interface specification.

(GB/T 29618.42) information. This section specifies communication implementations and other services based on IEC 62453-303-2. This section does not contain the FDT specification or the FDT specification.

1) PROFINET􀆿 is the trademark (PNO) of the PROFIBUSNutzer organization eV. PNO is a non-profit that supports PROFIBUS fieldbus A profitable trade organization.

This information is for the convenience of users of this section and does not constitute a recognition of the IEC trademark name holder or any of its products. can.

Compliance with this section does not require the use of this registered trademark. Use of the trademarks PROFIBUS and PROFINET requires the trademark name holder license.

Found what you need?

Document preview — GB/T 29618.5232-2018

National Standard of the People's Republic of China

ICS: 25.040
Classification: N 10

Issued by: State Administration for Market Regulation, China National Standardization Administration

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols, abbreviations and conventions
3.1 Terms and Definitions
3.2 Abbreviations
3.3 Convention
3.3.1 Naming and Reference of Data Types
3.3.2 Vocabulary 2 describing the degree of demand
3.3.3 Use of UML
4 bus category
5 Accessing instance and device data
5.1 Overview
5.2 DTM provides IO signal
5.3 Data Interface
5.3.1 Overview
5.3.2 Mapping of PROFINET data types to FDT data types
5.3.3 SemanticInfo
6 Protocol Specific Behavior
6.1 PROFINET device model
6.2 Configuration and parameterization of PROFINET devices
6.3 Information on PROMNET device DTM
6.4 Remarks for FDT1.2/2 compatibility
7 Protocol-specific use of general FDT data types
8 Protocol-specific generic data types. PnDeviceAddress
9 Network Management
9.1 Overview
9.2 Configuration
9.3 Process Data Item
9.4 Parameterization
10 Communication data type
10.1 Overview
10.2 ConnectRequest and ConnectResponse Services
10.2.1 PnConnectRequest Service
10.2.2 PnConnectResponse Service
10.3 DisconnectRequest and DisconnectResponse Service
10.3.1 PnDisconnectRequest Service
10.3.2 PnDisconnectResponse Service
10.4 TransactionRequest and TransactionResponse Service
10.4.1 PnReadRequest Service
10.4.2 PnReadResponse Service
10.4.3 PnWriteRequest Service
10.4.4 PnWriteResponse Service
10.4.5 PnCancelRequest Service
10.4.6 PnCancelResponse Service
10.5 SubscribeRequest and SubscribeResponse Service
10.5.1 PnSubscribeRequest
10.5.2 PnSubscribeResponse
10.6 UnsubscribeRequest and UnsubscribeResponse Services
10.6.1 PnUnsubscribeRequest Service
10.6.2 PnUnsubscribeResponse Service
10.7 AbortMessage Service
10.8 PnResponseError
10.8.1 Communicationerror
10.8.2 Error handling during connection and disconnection
11 data type of data information
11.1 Overview
11.2 PnIOSignalInfo
11.3 Mapping of FDT data types to PROFINET data types
12 device identification
12.1 Overview
12.2 PnDeviceScanInfo Data Type
12.3 PnDeviceIdentInfo data type

1 Scope

This part of GB/T 29618 provides the integration of PROFINET􀆿1) technology into a CLI-based implementation of the FDT interface specification.

(GB/T 29618.42) information.

This section specifies communication implementations and other services based on IEC 62453-303-2.

This section does not contain the FDT specification or the FDT specification.

1) PROFINET􀆿 is the trademark (PNO) of the PROFIBUSNutzer organization eV. PNO is a non-profit that supports PROFIBUS fieldbus

A profitable trade organization. This information is for the convenience of users of this section and does not constitute a recognition of the IEC trademark name holder or any of its products.

can. Compliance with this section does not require the use of this registered trademark. Use of the trademarks PROFIBUS and PROFINET requires the trademark name holder license.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 15969.3-2017 Programmable controllers Part 3. Programming languages (IEC 61131-3.2013, IDT)

GB/T 29618.1-2017 Field Device Tool (FDT) Interface Specification Part 1. Overview and Guidelines (IEC 62453-1.

2016, IDT)

GB/T 29618.2-2017 Field device tool (FDT) interface specification Part 2. Concepts and detailed description (IEC 62453-2.

2016, IDT)

GB/T 29618.42-2017 Field Device Tool (FDT) Interface Specification Part 42. Object Model Profile Integration Common Language

Infrastructure (IEC /T R62453-42..2016, IDT)

IEC 61158 (all parts) Industrial Communication Network Fieldbus Specification (Industrialcommunicationnetworks-

Fieldbusspecifications)

IEC 61158-6-10 Industrial Communication Network Fieldbus Specification Part 6-10. Application Layer Protocol Specification Type 10 Elements (Industrialcommunicationnetworks-Fieldbusspecifications-Part 6-10. Applicationlayerprotocol specification-Type10elements)

IEC 61784-1.2014 Industrial Communication Network Profiles Part 1. Fieldbus Profiles (Industrialcommunication networks-Profiles-Part 1. Fieldbusprofiles)

IEC 62453-303-2.2009 Field Device Tool (FDT) Interface Specification Part 303-2. Communication Profile Integration IEC 61784

CP3/4, CP3/5andCP3/6[Fielddevicetool(FDT)interfacespecification-Part 303-2.Communica-

Tionprofileintegration-IEC 61784CP3/4, CP3/5 and CP3/6]

IEC 62453-303-2.2009/AMD1.2016

GB/T 33009.2 | GB/T 33009.1 | GB/T 33008.1 | GB/T 29618.3032 | GB/T 29618.3031 | GB/T 29618.5215 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 98 pages — is available in the English PDF.

Referenced standards

Normative references

IEC 61131 · IEC 62453 · IEC 61158 · IEC 61784

How to Download GB/T 29618.5232-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.