GB/T 29618.309-2025Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9 (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents".

Drafting.

This document is Part 309 of GB/T 29618, "Field Device Tool (FDT) Interface Specification". GB/T 29618 has been published.

The following section.

---Part 1: Overview and Guidelines;

---Part 2: Concepts and Detailed Description;

---Part 301: Communication Standards Integration with FF Fieldbus Specification;

---Part 302: Communication Industry Standards Integration of Common Industrial Protocols;

---Part 306: Communication Standards Integration with INTERBUS Fieldbus Specification;

---Part 309: Communication Industry Standard Integration IEC 61784CPF9;

---Part 315: Communication Standards Integration with MODBUS Fieldbus Specification;

---Part 41: Object Model Rules for Integrating a Common Object Model;

---Part 42: Object Model Rules Integration Common Language Infrastructure;

---Part 5110: Communication implementation of the generic object model IEC 61784CPF1;

---Part 5120: Communication implementation of the generic object model IEC 61784CPF2;

---Part 515: Communication Implementation of the Common Object Model in the MODBUS Fieldbus Specification;

---Part 5215: Communication implementation of the universal language infrastructure IEC 61784CPF15;

---Part 5231: Communication implementation of the universal language infrastructure IEC 61784 CP3/1 and CP3/2;

---Part 5232: Communication implementation of the universal language infrastructure IEC 61784 CP3/4, CP3/5 and CP3/6;

---Part 529: Communication implementation of the universal language infrastructure IEC 61784CPF9;

---Part 61: Style Guide for Device Type Manager in the Common Object Model;

---Part 62: Field Equipment and Tooling (FDT) Style Guide.

This document supersedes GB/T 29618.309-2013 "Field Device Tool (FDT) Interface Specification Part 309: Communication Integration".

"High-Speed Channel for Addressable Remote Sensors" differs from GB/T 29618.309-2013 in that, aside from structural adjustments and editorial changes, the main technical differences are...

The changes are as follows.

--- Added the following abbreviations. "C8PSK", "DR", "EDD", "FSK", and "HART" (see 3.2);

---A vocabulary list has been added (see 3.3.2);

---Added "Unique Identifier for the IEC 61784CPF9 Protocol" (see Chapter 4);

---Added an overview of access to instance and device data (see 5.1);

---Added "Process Channel Objects Provided by DTM" (see 5.2);

---The overview of the protocol-specific behaviors section has been revised (see 6.1, 2013 version 6.1);

---Added features such as the use of device addressing information in protocol-specific behavior sections, extended command numbers, handling of communication failures and timeouts, and delays.

Handling delayed responses, topologies with hybrid HART protocols, nested communication with multiple gateways, and wireless network systems.

The communication and network architecture in [the context of the text] (see Chapter 6);

---Added an overview of network management data types, addressing modes, address information, and additional information about the "Extended_HART" protocol.

Address information (see Chapter 9);

---Added protocol-specific addressing information and data type definitions to the communication data type section (see Chapter 10);

---Added a scanning address range for device identifiers, and a description table of the address ranges for device identifiers (see 12.2);

---Added support for extended manufacturer and device type codes in the device identification section, and device type with the "HART_Basic" protocol.

Identifying data types, the general device type of the "Extended_HART" protocol, and scanning "Extended_ the HART protocol identifies data types (see Chapter 12);

---The table "Simple Communication Data Types" has been modified, and the following data types have been added. addressingMode, ipAddress, ipP-rotocolVersion, longAddressByte1, longAddressByte2, longAddressByte3, longAddressByte4,

---The table "Structured Communication Data Types" has been modified, and the data type "ExConnectRequest" has been added (see Table 8).

Table 8 (2013 edition).

This document is equivalent to IEC 62453-309:2022 "Field Device Tool (FDT) Interface Specification Part 309: Communication Integration".

IEC 61784CPF9.

Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.

This document was proposed by the China Machinery Industry Federation.

This document is under the jurisdiction of the National Technical Committee on Standardization of Industrial Process Measurement and Control (SAC/TC124).

Introduction

This document is an interface specification for developers of Field Device Tool (FDT) components, used for functional control in a client/server architecture.

Control and data access. The documentation describes the development of standard interfaces through analysis and design, enabling seamless operation across multiple vendors.

With the integration of fieldbus into the control system, some other work needs to be done. Besides fieldbus and device-specific functionalities...

Beyond these tools, they also need to be integrated into higher-level system planning and engineering tools. This is especially important in the context of broad and heterogeneous control systems.

In systems, especially in the process industry, it is crucial to define engineering interfaces that are easy for all stakeholders to use.

The Device Type Manager (DTM) is a device-specific software component provided by the field device manufacturer along with the device. The DTM...

This document defines the FDT interface for integration into engineering tools. This integration method typically supports all types of fieldbuses, thus meeting...

This satisfies the need to integrate different types of equipment into heterogeneous control systems.

Figure 1 shows how this document corresponds to the structure of the GB/T 29618 series.

Figure 1.Structure diagram of this document

GB/T 29618 aims to provide an interface specification for field equipment tools (FDTs) and is proposed to consist of the following parts.

---Part 1: Overview and Guidelines. The purpose is to provide an overview and guidelines for the GB/T 29618 series, including.

- Explain the structure and content of the GB/T 29618 series;

- Provides some instructions that are applicable to other parts of the GB/T 29618 series;

- Describe its relationship with the other parts of GB/T 29618.

---Part 2: Concepts and Detailed Description. The purpose is to explain the general principles of field equipment and tool concepts, and to specify general definitions.

Images, generic object behaviors, and interactions between generic objects.

---Part 301: Communication Standards Integration with FF Fieldbus Specification. The purpose is to provide specifications for integrating the FF protocol into the FDT standard.

Information, including communication definitions, protocol-specific extensions, and block representations, is applicable to FF's device and system-specific definitions.

---Part 302: Communication Industry Standards Integration of Common Industrial Protocols. The aim is to integrate CIP technology into the FDT interface specification.

Information, and regulations governing communication and other services.

---Part 306: Communication Standards Integration with INTERBUS Fieldbus Specification. The aim is to integrate INTERBUS technology.

Information about the FDT interface specification, and the definition of communication and other services.

---Part 309: Communication Standard Integration IEC 61784CPF9.The purpose is to integrate HART technology into the FDT interface specification.

Information in the specification (GB/T 29618.2) and provisions for communication and other services.

---Part 315: Communication Standards Integration with MODBUS Fieldbus Specification. The aim is to integrate Modbus TCP and Modbus...

SerialLine technology is integrated into the FDT interface specification and defines communication and other services.

---Part 41: Object Model Integration - General Object Model. The purpose is to define a general object model based on MSCOM technology.

The implementation of FDT principles includes object behavior and object interaction implemented through COM interfaces.

---Part 42: Object Model Standardization and Common Language Infrastructure. The aim is to define a common language infrastructure based on Microsoft.NET technologies.

The implementation uses the FDT principle, including object behavior and object interaction implemented through.NET interfaces.

---Part 5110: Communication Implementation of the Common Object Model IEC 61784CPF1.The aim is to provide a communication implementation for the Foundation's field...

Implementation method of integrating FF technology into the COM-based FDT interface specification (IEC/T R62453-41).

---Part 5120: Communication Implementation of the Common Object Model IEC 61784CPF2.The aim is to provide a way to integrate CIP technology.

The implementation method of the COM-based FDT interface specification (IEC/T R62453-41).

---Part 5131: Communication Implementation of the Common Object Model IEC 61784 CP3/1 and CP3/2.The purpose is to provide communication capabilities for field applications.

Implementation method of integrating bus technology into the COM-based FDT interface specification (IEC/T R62453-41).

---Part 5132: Communication Implementation of the Common Object Model IEC 61784 CP3/4, CP3/5 and CP3/6.The purpose is to provide...

Implementation method of integrating PROFINET technology into the COM-based FDT interface specification (IEC/T R62453-41).

---Part 515: Communication Implementation of the MODBUS Fieldbus Specification using the Common Object Model. The aim is to provide a communication implementation for Modbus...

The implementation method of integrating technology into the COM-based FDT interface specification (IEC/T R62453-41).

---Part 5160: Communication Implementation of the Common Object Model IEC 61784CPF6.The aim is to provide a way to integrate INTERBUS technology...

The implementation method of integrating the technology into the COM-based FDT interface specification (IEC/T R62453-41).

---Part 5190: Communication Implementation of the Common Object Model IEC 61784CPF9.The aim is to provide a way to integrate HART technology.

The implementation method of the COM-based FDT interface specification (IEC/T R62453-41).

---Part 5215: Communication Implementation of the Common Language Infrastructure IEC 61784CPF15.The purpose is to provide a way to...

Modbus technology is integrated into the FDT interface specification (GB/T 29618.42) for CLI-based information implementation, and specifies the information based on...

The implementation of communication and other services as per GB/T 29618.315.

---Part 5231: Communication implementation of the universal language infrastructure IEC 61784 CP3/1 and CP3/2.The purpose is to provide...

Integrating fieldbus technology into the FDT interface specification (GB/T 29618.42) for CLI-based information implementation, and specifying the information based on...

Communication implementation and other services of IEC 62453-303-1.

---Part 5232: Communication implementation of the universal language infrastructure IEC 61784 CP3/4, CP3/5 and CP3/6.The purpose is to...

This provides information on integrating PROFINET technology into the CLI-based implementation of the FDT interface specification (GB/T 29618.42).

It also specifies the communication implementation and other services based on IEC 62453-303-2.

---Part 529: Communication Implementation of the Common Language Infrastructure (CLI) IEC 61784CPF9.The aim is to provide a means to implement HART technology...

The technology is integrated into the FDT interface specification (GB/T 29618.42) and the information is implemented based on CLI, and it is specified that it is based on GB/T 29618.309.

The implementation of communication and other services.

---Part 61: Style Guide for Device Type Manager in a Generic Object Model. The aim is to present a user interface for the Device Type Manager (DTM).

And some guidelines and specifications for function implementation.

---Part 62: Field Device Tool (FDT) Style Guide. The purpose is to explain the implementation based on CLI (Common Language Framework).

Guidelines and guidelines for DTM and the framework application components related to user interface and behavior.

Field Device Tool (FDT) Interface Specification Part 309: Communication Industry Standards Integration IEC 61784CPF9

1 Scope

HART (Hardware and Communication Technology) family 9 defines communication standards based on IEC 61158-5-20 and IEC 61158-6-20.Basic standards (CP) 9/1 is defined in IEC 61784-1.

This document provides information on integrating HART bus technology into the FDT interface specification (IEC 62453-2).

This document specifies communication and other services.

This document contains neither the FDT specification nor does it modify it.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

GB/T 29618.1-2017 Field Device Tool (FDT) Interface Specification Part 1: Overview and Guidelines (IEC 62453-1.

2016, IDT)

Note. GB/T 29618.1-2017 Field Device Tool (FDT) Interface Specification Part 1: Overview and Guidelines (IEC 62453-1:2016, IDT) IEC 62453-2 Field Device Tool (FDT) Interface Specification Part 2: Concepts and Detailed Description [Fielddevicetool] Note. GB/T 29618.2-2017 Field Device Tool (FDT) Interface Specification Part 2: Concepts and Detailed Description (IEC 62453-2:2016, IDT) IEC 62453-2:2022 Field Device Tool (FDT) Interface Specification Part 2: Concepts and Detailed Description [Fielddevicetool] Note. GB/T 29618.2-2017 Field Device Tool (FDT) Interface Specification Part 2: Concepts and Detailed Description (IEC 62453-2:2016, IDT)

3 Terms, Definitions, Abbreviations and Conventions