Valid

GB/T 29601-2013Stainless steel ware (English PDF)

不锈钢器皿

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29601-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 19, 2013

Implementation date

February 1, 2014

Scope

GB/T 29601-2013 is the English-translated version of 不锈钢器皿.

GB/T 29601-2013 is the Chinese standard "Stainless steel ware". Its scope clause reads: This standard specifies terms and definitions, product classification, requirements, test methods, inspection rules, marking, labelling, operating instructions, packaging, transportation and storage of stainless steel ware (hereafter referred to as ware).

This standard is applicable to stainless steel food contact ware made of stainless steel plate or stainless steel composite plate. This standard is not applicable to stainless steel pressure cooker, stainless steel kettle, stainless steel vacuum cup and other vacuum insulated containers.

Its clauses include terms and definitions; product classification; requirements.

Found what you need?

Document preview — GB/T 29601-2013

National Standard of the People's Republic of China

ICS
97.040.60
Classification
Y 73

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Product Classification
  • 5 Requirements
  • 6 Test Methods
  • 7 Inspection Rules
  • 8 Marking, Labelling and Operating Instructions
  • 9 Packaging, Transportation and Storage
  • Annex A (Informative) Structural Type of Stainless Steel Ware
  • Annex B (Normative) Fatigue Strength Test for Handle of Stainless Steel Pots
  • Annex C (Normative) Torsion Strength Test for Handle of Stainless Steel Pots
  • Annex D (Normative) Flame Retardance Test for Handle of Stainless Steel Pots

1 Scope

This standard specifies terms and definitions, product classification, requirements, test methods, inspection rules, marking, labelling, operating instructions, packaging, transportation and storage of stainless steel ware (hereafter referred to as ware).

This standard is applicable to stainless steel food contact ware made of stainless steel plate or stainless steel composite plate.

This standard is not applicable to stainless steel pressure cooker, stainless steel kettle, stainless steel vacuum cup and other vacuum insulated containers.

2 Normative References

The following documents for the application of this document are essential. For dated reference, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.

GB/T 191 Packaging - Pictorial Marking for Handling of Goods

GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method

GB/T 223.11 Iron Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method

GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - the Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content

GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - the Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content

GB/T 223.23 Iron, Steel and Alloy - Determination of Nickel Content - the Dimethylglyoxime Spectrophotometric Method

GB/T 223.25 Methods for Chemical Analysis of Iron, Steel and Alloy - the Dimethylglyoxime Gravimetric Method for the Determination of Nickel Content

GB/T 223.28 Methods for Chemical Analysis of Iron, Steel and Alloy - the alpha-benzoinoxime Gravimetric Method for the Determination of Molybdenum Content

GB/T 223.37 Methods for Chemical Analysis of Iron, Steel and Alloy - the Indophenol Blue Photometric Methods for the Determination of Nitrogen Content after Distillation Separation

GB/T 223.59 Iron, Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method

GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy - the Sodium (Potassium) Periodate Photometric Method for the Determination of Manganese Content

GB/T 223.85 Steel and Iron - Determination of Sulfur Content - Infrared Absorption Method after Combustion in an Induction Furnace

GB/T 223.86 Iron Steel and Alloy - Determination of Total Carbon Content - Infrared Absorption Method after Combustion in an Induction Furnace

GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection

GB/T 2829 Sampling Procedures and Tables for Periodic Inspection by Attributes (Apply to Inspection of Stability for Productive Process)

GB/T 3190 Wrought Aluminum and Aluminum Alloy - Chemical Composition

GB 4803 Hygienic Standard for Polyvinyl Chloride Resin Used as Food Container and Packaging Material

GB/T 5009.81 Method for Analysis of Hygienic Standard of Stainless Steel Food Containers and Table Wares

GB/T 6388 Transport Package Shipping Mark

GB/T 6543 Single and Double Corrugated Boxes for Transport Packages

GB/T 6544 Corrugated Fiberboard

GB 9684 National Food Safety Standard - Stainless Steel Products

GB/T 10125 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests

QB/T 3832 Evaluation of the Corrosion Test Results of the Metal Deposits for the Light Industrial Products

3 Terms and Definitions

For the purpose of this standard, the following terms and definitions apply.

3.1 stainless steel ware

food contact ware made of stainless steel plate or stainless steel composite plate, including pots, cups, dishes, basins, boxes and buckets, etc.

3.2 body

food contact stainless steel part in ware

3.3 inside diameter

radial length of the inside edge at the mouth of the ware body (see Annex A)

3.4 outside diameter

the maximum radial length of the outside edge of the ware body (see Annex A)

3.5 volume

the maximum volume of water contained in the ware

3.6 nominal volume

the volume designed for the product

3.7 layer bonding bottom

bonding one or more layers of metal plate at the bottom of the ware

4 Product Classification

4.1 Variety

According to use function, wares are classified into pots, cups, dishes, basins, boxes, buckets, etc. (see Annex A).

4.2 Specification

4.2.1

For pots, specification is expressed in inside diameter and volume; for cups, boxes and buckets, specification is expressed in inside diameter or volume; for dishes and basins, specification is expressed in outside diameter; as for square and special-shaped wares, specification is expressed in transverse and longitudinal maximum dimensions.

4.2.2

When specification is expressed in inside diameter or outside diameter, the unit is centimeter (cm), take the rounded number and even number on priority.

4.2.3

When specification is expressed in volume, the unit is liter (L), the value is rounded to one decimal place; the unit may be milliliter (mL) if the volume is less than 1L.

5 Requirements

5.1 General requirements

5.1.1 Hygiene requirements
5.1.1.1

Raw material requirements, sensory requirements, physical and chemical indexes and additives of ware shall meet the relevant requirements of GB 9684.

5.1.1.2

Other materials of the part in contact with food shall meet the requirements of corresponding national standard.

5.1.2 Appearance
5.1.2.1

Product marks shall be upright, legible and complete, and shall meet the requirements of 8.1.1.

5.1.2.2

The parts accessible to hands shall be smooth without burrs so as not to hurt hands.

5.1.2.3

Under normal conditions, it shall be easy to clean all food contact surfaces.

5.1.3 Volume

The actual volume of the ware shall not be less than 95% of the nominal volume, and shall meet the requirements after the test according to 6.2.3.

5.1.4 Corrosion resistance

After the stainless steel food contact materials of the ware are tested according to 6.2.4, corrosion-resistant grade shall not be inferior to Grade 8.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 29601-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29601-2013

$295.00