Valid

GB/T 29560-2013Portal slewing cranes (English PDF)

门座起重机

Preview PDF

This is a limited preview

Buy now to download the full PDF (46 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29560-2013 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the PRC

Level / Type

National · Recommended

Issue date

July 19, 2013

Implementation date

January 1, 2014

Scope

GB/T 29560-2013 is the English-translated version of 门座起重机.

GB/T 29560-2013 is the Chinese standard "Portal slewing cranes".

Its scope clause reads: This standard specifies the nominal weight of 3.2t ~ 500t gantry crane (hereinafter referred to as "Crane") terms and definitions, types Classification and basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to the following places in the work of portal cranes. a) Port of groceries, bulk cargo, containers, equipment and other cargo-handling port gantry crane; b) in the shipyards and repair docks, when shipbuilding, segmental structure and mechanical and electrical equipment installation and other operations with a shipyard portal crane; c) Hydraulic and Electric Engineering concrete lifting, pouring, lifting hydraulic metal structure and thermal power engineering for mechanical and electrical equipment installation Industry Water & Electric gantry crane used.

For the nominal weight of more than 500t gantry crane gantry crane and other similar establishments, reference may be used.

This standard does not apply to the crane working in the following environments. --- Flammable, combustible dust, flammable gases and corrosive gases (except salt spray) environment; --- Nuclear radiation, toxic gas environment; Environment --- lifting the molten or hot metal.

Found what you need?

Document preview — GB/T 29560-2013

National Standard of the People's Republic of China

ICS: 53.020.20
Classification: J 80

Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and basic parameters of type
5 Technical Requirements
6 Test methods
7 Inspection rules
8 signs, packaging, transportation and storage
Appendix A (normative) gantry crane rail wheels tolerances and tolerances
Annex B (informative) Experimental test data recording table

1 Scope

This standard specifies the nominal weight of 3.2t ~ 500t gantry crane (hereinafter referred to as "Crane") terms and definitions, types

Classification and basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to the following places in the work of portal cranes.

a) Port of groceries, bulk cargo, containers, equipment and other cargo-handling port gantry crane;

b) in the shipyards and repair docks, when shipbuilding, segmental structure and mechanical and electrical equipment installation and other operations with a shipyard portal crane;

c) Hydraulic and Electric Engineering concrete lifting, pouring, lifting hydraulic metal structure and thermal power engineering for mechanical and electrical equipment installation

Industry Water & Electric gantry crane used.

For the nominal weight of more than 500t gantry crane gantry crane and other similar establishments, reference may be used.

This standard does not apply to the crane working in the following environments.

--- Flammable, combustible dust, flammable gases and corrosive gases (except salt spray) environment;

--- Nuclear radiation, toxic gas environment;

Environment --- lifting the molten or hot metal.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 324 Weld notation

GB 755-2008 rotating motor fixed and performance

GB/T 985.1 gas welding, arc welding, gas welding and beam welding Recommended groove

GB/T 985.2 SAW recommended groove

GB/T 1184 shape and position tolerances without individual tolerance value

GB/T 1228 high strength steel with large hexagon head bolts

GB/T 1229 steel with high strength large hexagon nuts

GB/T 1230 high-strength steel washers

GB/T 1231 Steel hexagon head bolts, hexagon nuts, plain washers for high-strength

GB/T 1413 Series 1 freight containers - Classification, dimensions and ratings

GB/T 1800.2 Geometrical product specifications (GPS) limits and fits - Part 2. Standard tolerance grades and holes and shafts limit bias

Difference list (GPS) with limits and tolerances and fits select GB/T 1801 Geometrical product specifications

GB/T 1804 General tolerances Tolerances for linear and angular dimensions without individual tolerance

GB 2893 Safety colors

GB/T 3220 container spreader

GB/T 3323 metal fusion welded joints radiography

GB/T 3632 Steel with torsional shear bolts connecting deputy

GB/T 3766 Hydraulic System General technical conditions

GB/T 3811-2008 crane design specifications

Logo GB/T basic safety rules and equipment terminals and conductor terminal 4026 HMI flag identified

GB/T 24818.4 | GB/T 33082 | GB/T 24809.2 | GB/T 29562.2 | GB/T 29562.1 | GB/T 29561 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 46 pages — is available in the English PDF.

Referenced standards

Normative references

GB 755-2008 · GB/T 1801 · GB 2893 · GB/T 3323

Similar standards

GB/T 3811-2008|GB 6067.1-2010|GB/T 5905-2011|GB/T 14405-2011|GB/T 26470-2025|GB 5226.1-2019

How to Download GB/T 29560-2013

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.