Valid

GB/T 29521-2013Safety specification for underground mining of tungsten mine (English PDF)

钨矿山地下开采安全生产规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29521-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 9, 2013

Implementation date

February 1, 2014

Scope

GB/T 29521-2013 is the English-translated version of 钨矿山地下开采安全生产规范.

GB/T 29521-2013 is the Chinese standard "Safety specification for underground mining of tungsten mine".

Its scope clause reads: This standard specifies the underground mining of tungsten mine production safety organization and management, goal management, education and training, design, construction, production, emergency During the basic requirements management, security, reporting and statistical analysis.

This standard applies to tungsten mining enterprises. This standard does not apply to deposits in liquid, possession of open-pit mine, coal or coal to generate total deposits, brick clay and sand mining and other mine opening Mining enterprises. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 29521-2013

National Standard of the People's Republic of China

ICS
13.100
Classification
H 09

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 General
  • 4.1.1 Safety Committee
  • 4.1.2 professional production safety management
  • 4.2 Safety Objective Management
  • 4.2.1 establish safety production target of
  • 4.2.2 Safety Objective 2 Implementation
  • 4.3 Production Safety Regulations and System
  • 4.3.1 Production safety regulations
  • 4.3.2 Production Safety System
  • 4.4 safety education and training
  • 4.5 Production Process Safety Management System
  • 4.5.1 Production Support System
  • 4.5.2 Change Management
  • 4.6 Downhole safety exits and walkways
  • 4.6.1 mine safety exit
  • 4.6.2 walkways
  • 4.7 Safety equipment and facilities management
  • 4.7.1 Basic requirements
  • 4.7.2 Equipment Safety Management
  • 4.7.3 Facility Security Management
  • 4.8 Chamber roadway and safety requirements
  • 4.9 Downhole lighting and safety signs
  • 4.9.1 Underground lighting
  • 4.9.2 Safety signs
  • 4.10 Security Monitoring and Communication
  • 4.10.1 Safety Monitoring
  • 4.10.2 Communication
  • 4.11 Hazard Identification and Risk Assessment
  • 4.11.1 Hazard Identification
  • 4.11.2 Risk Assessment
  • 5 production process safety requirements
  • 5.1 MINING DESIGN safety requirements
  • 5.2 Mining process safety requirements
  • 5.2.1 General requirements
  • 5.2.2 job preparation before
  • 5.2.3 Drilling
  • 5.2.4 Blasting
  • 5.2.5 Ventilation
  • 5.2.6 Dust
  • 5.2.7 Roof Support and Management
  • 5.2.8 Underground and Promotion
  • 5.2.9 goaf managed
  • 5.2.10 pressed Safety Management
  • 5.2.11 safety inspection and rectification
  • 6 Occupational Health Management
  • 6.1 Occupational Protection
  • 6.2 Occupational Health Monitoring
  • 6.3 Occupational Hazard Control
  • 6.4 Occupational Health Surveillance
  • 7 Safety Emergency Management
  • 7.1 Emergency Plan and Emergency Management
  • 7.1.1 Emergency Plan
  • 7.1.2 Emergency Management
  • 7.2 Emergency Preparedness and identified
  • 7.2.1 Emergency Preparedness
  • 7.2.2 Emergency identified
  • 7.3 Emergency Organization and Program
  • 7.3.1 Emergency Organization
  • 7.3.2 Emergency Program
  • 7.4 Security and Emergency Measures
  • 7.4.1 Communication and Information
  • 7.4.2 aid device
  • 7.4.3 Rescue HR
  • 7.4.4 Emergency funding
  • 7.4.5 Medical Resources
  • 7.4.6 Transportation Resources
  • 7.5 emergency training and drills
  • 7.5.1 Emergency Training
  • 7.5.2 emergency drill
  • 7.6 Emergency Assessment and rectification
  • 8 and safety technology and to ensure funding for the use of
  • 8.1 Safety Science and Technology
  • 8.2 security to ensure funding and use
  • 9 Security Incident Reporting and Statistical Analysis
  • 9.1 Security Incident Reporting
  • 9.2 Security Statistics and Analysis
  • 9.3 Safety Evaluation

1 Scope

This standard specifies the underground mining of tungsten mine production safety organization and management, goal management, education and training, design, construction, production, emergency

During the basic requirements management, security, reporting and statistical analysis.

This standard applies to tungsten mining enterprises.

This standard does not apply to deposits in liquid, possession of open-pit mine, coal or coal to generate total deposits, brick clay and sand mining and other mine opening

Mining enterprises.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 2894 Safety Signs and use guidelines

GB 6722 Blasting Safety Regulations

GB/T 13869 Electrical Safety Guidelines

GB 14161 Mine Safety Signs

GB 16423 metal and nonmetal mine safety rules

GB 18218 hazardous chemicals major hazard identification

GB/T 28001-2001 Occupational Health and Safety Management System

GB 50070 Mine design of electric power

GB 50630 fire protection engineering design non-ferrous metal

AQ/T 9002 production units of production safety accident emergency response plan guidelines

3 Terms and Definitions

GB/T 28001-2001 define the following terms and definitions apply to this document. For convenience, the following repeating lists

GB/T 28001-2001 of certain terms and definitions.

3.1 Tungsten Mines

In the modern technical and economic conditions, it can be extracted on a commercial scale national economy required tungsten ore and other associated minerals mining enterprise.

3.2 Safety Objective Management

In modern management theory as the basis, system theory as a guide to the scientific method as a means, in accordance with the overall objective of tungsten mine production and operation

Superior production safety requirements established by the various levels of production and safety goals, and longitudinal and lateral communication and coordination, as far as possible with the personal vision

Enterprise total production safety goal is the same, forming a network system security objectives.

3.3 Six systems

Underground metal and nonmetal mine safety hedge "Six Systems" refers to the monitoring and control system, underground personnel positioning system, emergency system, […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Similar standards

How to Download GB/T 29521-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29521-2013

$315.00