Valid

GB/T 29480-2013Safety guideline for accessible electrical equipments (English PDF)

接近电气设备的安全导则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29480-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 11, 2012

Implementation date

July 1, 2013

Scope

GB/T 29480-2013 is the English-translated version of 接近电气设备的安全导则.

GB/T 29480-2013 is a safety guideline for electrical equipment that people may approach.

Clause 1 says the standard specifies the protective measures against electrical hazards and the safety principles for electrical equipment, together with the requirements put on the personnel who approach it, and that it applies to the various kinds of electrical equipment that may be approached and used in an electrical workplace, including the management, installation and maintenance personnel.

Clause 2 cites GB 19517-2009 and GB/T 24612.1-2009.

Clause 3 takes the definitions of those two standards and sets out five of its own, each with its source: electrical equipment and the electrical workplace, both from GB 19517-2009, the electrically safe work condition from GB/T 24612.1-2009, electrical work, taken from order number 30 of the State Administration of Work Safety and covering the operation, maintenance, installation, repair, renovation, construction and commissioning of electrical equipment but not work on the power system network, and the professional, whose English name the draft misspells, defined as the person with the education, the experience and the ability to recognise the risks and avoid the electrical hazards involved.

The definition of the electrical workplace describes a space used mainly for running electrical equipment and which as a rule only trained or initially trained specialists may enter.

The draft breaks off after that fifth definition, so the clauses that carry the protective measures, the safety principles and the personnel requirements announced in clause 1 are not shown on the page.

The standard is administered by SAC/TC25 and filed under ICS 29.020 and Chinese classification K09. It was issued on 7 February 2013 and has applied since 1 July 2013.

Found what you need?

Document preview — GB/T 29480-2013

National Standard of the People's Republic of China

ICS: 29.020
Classification: K 09

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and Definitions

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

1 Scope

This standard specifies the electrical hazard protection measures and safety principles for electrical equipment, electrical equipment near the proposed personnel requirements content.

This standard applies to electrical work place may be related to access and to use various types of electrical equipment, including the management, installation, equipment Maintenance personnel.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 19517-2009 National Electrical Safety Equipment Technical Specifications Safety requirements

GB/T 24612.1-2009 Electrical Equipment Applications - Part 1: General

3 Terms and Definitions

GB 19517-2009, GB/T 24612.1-2009 and as defined in the following terms and definitions apply to this document.

3.1 Electrical equipment

Where by function and structure applicable to products or components of power applications. Such as power generation, transmission, distribution, storage, measurement, control, regulation, turn Change, monitoring, protection, and power consumption of products, including in the field of communication technology and its combined into electrical equipment, electrical equipment, electrical appliance. [GB 19517-2009, defined B.1]

3.2 Electrical workplace

Mainly used in electrical equipment running and generally only initial training professionals or trained personnel to enter a space or spaces. [GB 19517-2009, defined B.17]

3.3 Electrical safety working conditions

Was isolated in installed at or near live parts conductor or conductive member, locking and regulations identified in the state, have been tested to ensure the site No voltage and a state in accordance with the provisions grounded. [GB 24612.1-2009, the definition 3.4]

3.4 Electrical work

Electrical equipment operation, maintenance, installation, repair, renovation, construction, commissioning and other operations (excluding power system network job). Including high Piezoelectric industry work, electrical work and low pressure explosion-proof electrical work. [State Administration of Work Safety Order No. 30]

3.5 Professional

Professionally educated and have experience and ability to identify risks and to be able to avoid electrical hazards involved. [GB 19517-2009, defined B.14]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 13869-2026|GB/T 24114.2-2026|GB/T 33589-2026|GB/T 33592-2026|GB/T 33593-2026|GB/T 33603-2026

How to Download GB/T 29480-2013

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.