Valid

GB/T 29323-2012Specification for 1 000 kV circuit breaker protection equipment (English PDF)

1 000kV断路器保护装置技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29323-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2012

Implementation date

June 1, 2013

Scope

GB/T 29323-2012 is the English-translated version of 1 000kV断路器保护装置技术要求.

GB/T 29323-2012 is the Chinese standard "Specification for 1 000 kV circuit breaker protection equipment".

Its scope clause reads: This standard specifies the basic technical requirements 1000kV a half or double breaker breaker breaker protection device wiring, Test methods, inspection rules and to signs, packaging, transportation and storage requirements.

This standard applies to 1000kV double breaker or a microprocessor-based relay means half breaker breaker (hereinafter referred to as For the device), such as a device based on the design, manufacture, testing and applications.

Found what you need?

Document preview — GB/T 29323-2012

National Standard of the People's Republic of China

ICS: 29.240.99
Classification: K 45

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 2 Technical Requirements
4.2 rated electrical parameters
4.3 Power consumption
5 4.6 Overload
4.7 insulation
4.8 heat-resistant properties
4.9 EMC requirements
4.10 DC Power Supply Effect
4.11 static simulation, dynamic simulation
4.12 8 continuous power
4.13 Mechanical Properties
4.14 texture, appearance and other
5 Test methods
5.1 Test conditions
5.2 Technical Performance Test
5.3 Temperature Test
5.4 storage, transportation extreme ambient temperature test
5.5 Power consumption test
5.6 overload test
5.7 Insulation Test
5.8 Humidity Test
5.9 EMC requirements test
5.10 DC power impact test
5.11 continuous test
6 Inspection Rules
6.1 Inspection classification
6.2 factory inspection
6.3 Type inspection
7 signs, packaging, transportation and storage
7.1 marks
7.2 Packaging
7.3 Transport
7.4 Storage
8 Other

1 Scope

This standard specifies the basic technical requirements 1000kV a half or double breaker breaker breaker protection device wiring,

Test methods, inspection rules and to signs, packaging, transportation and storage requirements.

This standard applies to 1000kV double breaker or a microprocessor-based relay means half breaker breaker (hereinafter referred to as

For the device), such as a device based on the design, manufacture, testing and applications.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

GB/T 2887-2011 General specification for computer sites

GB/T 2900.17 Electrotechnical terminology measuring relays

GB/T 2900.49 Electrotechnical terminology - Power System Protection

GB/T 7261-2008 Test Method for basic relay protection and automatic safety devices

GB/T 9361-2011 computer site security requirements

GB/T 11287-2000 Electrical relays - Part 21. Measuring relays and protection equipment vibration, shock, bump and seismic

Test Section 1. Vibration tests (sinusoidal)

GB/T 14285-2006 relaying protection and security automatic device technical regulations

GB/T 14537-1993 measure the impact of the collision with relays and protection equipment -

GB/T 14598.9-2010 metric Part 22-3 relays and protection equipment. Electrical disturbance tests anti-electromagnetic radiation

Degree of disturbance

GB/T 14598.10-2012 Electrical relays - Part 22-4. Electrical disturbance tests for measuring relays and electrical protection equipment

Fast transient/burst immunity test

GB/T 14598.11-2011 metric Part 11 relays and protection equipment. Auxiliary power port voltage dips, short interruptions,

Voltage and ripple

GB/T 14598.13-2008 Electrical relays - Part 22-1. Electrical disturbance tests measure relays and protection equipment

1MHz burst immunity test

GB/T 14598.14-2010 metric Part 22-2 relays and protection equipment. Electrical disturbance tests - Electrostatic discharge tests

GB/T 14598.16-2002 Electrical relays - Part 25. Electromagnetic emission tests for measuring relays and protection equipment

GB/T 14598.17-2005 Electrical relays - Part 22-6. Electrical disturbance tests for measuring relays and protection radio device

Frequency Field Immunity to conducted disturbances induced

GB/T 14598.18-2012 Electrical relays - Part 22-5. Electrical disturbance tests measure wave relays and protection equipment

Surge immunity test

GB/T 14598.19-2007 Electrical relays - Part 22-7. Electrical disturbance tests measure working relays and protection equipment

Frequency immunity tests

GB 14598.27-2008 metric Part 27 relays and protection equipment. Product safety requirements […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

Similar standards

GB/T 47669-2026|GB/T 47832-2026|GB/T 31487.1-2025|GB/T 31487.2-2025|GB/T 31487.3-2025|GB/T 25738-2024

How to Download GB/T 29323-2012

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.