GB/T 29322-2012Specification for 1 000 kV power transformer protection equipment (English PDF)
1 000kV变压器保护装置技术要求
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29322-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
June 1, 2013
Scope
GB/T 29322-2012 is the English-translated version of 1 000kV变压器保护装置技术要求.
GB/T 29322-2012 is the Chinese standard "Specification for 1 000 kV power transformer protection equipment". Its scope clause reads: This standard specifies the basic technical requirements 1000kV transformer protection devices, test methods, inspection rules and to sign, the package Loading, transportation and storage requirements.
This standard applies to microprocessor based protection equipment 1000kV transformer (hereinafter referred to as the device), such as plant design, manufacture, Inspection and application basis.
Found what you need?
Document preview — GB/T 29322-2012
National Standard of the People's Republic of China
- ICS
- 29.240.99
- Classification
- K 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 2 Technical Requirements
- 4.2 rated electrical parameters
- 4.3 Power consumption
- 4.6 Overload
- 4.7 insulation
- 4.8 heat-resistant properties
- 4.9 Electromagnetic compatibility requirements
- 4.10 DC Power Supply Effect
- 4.11 static simulation, dynamic simulation
- 4.13 Mechanical properties
- 4.14 texture, appearance, and other
- 5 Test methods
- 5.1 Test conditions
- 5.2 Technical Performance Test
- 5.3 Temperature Test
- 5.4 storage, transportation extreme ambient temperature test
- 5.5 Power consumption test
- 5.6 overload test
- 5.7 Insulation Test
- 5.8 Humidity Test
- 5.9 EMC requirements test
- 5.10 DC Power Supply Effect Test
- 5.11 continuous test
- 6 Inspection Rules
- 6.1 Inspection classification
- 6.2 factory inspection
- 6.3 Type inspection
- 7 signs, packaging, transportation and storage
- 7.1 marks
- 7.2 Packaging
- 7.3 Transport
- 7.4 Storage
- 8 Other
1 Scope
This standard specifies the basic technical requirements 1000kV transformer protection devices, test methods, inspection rules and to sign, the package
Loading, transportation and storage requirements.
This standard applies to microprocessor based protection equipment 1000kV transformer (hereinafter referred to as the device), such as plant design, manufacture,
Inspection and application basis.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2887-2011 General specification for computer sites
GB/T 2900.17 Electrotechnical terminology measuring relays
GB/T 2900.49 Electrotechnical terminology - Power System Protection
GB/T 7261-2008 Test Method for basic relay protection and automatic safety devices
GB/T 9361-2011 computer site security requirements
GB/T 11287-2000 Electrical relays - Part 21. Measuring relays and protection equipment vibration, shock, bump and seismic
Test Section 1. Vibration tests (sinusoidal)
GB/T 14285-2006 relaying protection and security automatic device technical regulations
GB/T 14537-1993 measure the impact of the collision with relays and protection equipment -
GB/T 14598.9-2010 metric Part 22-3 relays and protection equipment. Electrical disturbance tests anti-electromagnetic radiation
Degree of disturbance
GB/T 14598.10-2012 Electrical relays - Part 22-4. Electrical disturbance tests for measuring relays and electrical protection equipment
Fast transient/burst immunity test
GB/T 14598.11-2011 metric Part 11 relays and protection equipment. Auxiliary power port voltage dips, short interruptions,
Voltage and ripple
GB/T 14598.13-2008 Electrical relays - Part 22-1. Electrical disturbance test for measuring relays and protection equipment
Mortem 1MHz burst immunity test
GB/T 14598.14-2010 metric Part 22-2 relays and protection equipment. Electrical disturbance tests - Electrostatic discharge tests
GB/T 14598.16-2002 Electrical relays - Part 25. Electromagnetic emission tests for measuring relays and protection equipment
GB/T 14598.17-2005 Electrical relays - Part 22-6. Electrical disturbance tests for measuring relays and protection radio device
Frequency Field Immunity to conducted disturbances induced
GB/T 14598.18-2012 Electrical relays - Part 22-5. Electrical disturbance tests measure wave relays and protection equipment
Surge immunity test
GB/T 14598.19-2007 Electrical relays - Part 22-7. Electrical disturbance tests measure working relays and protection equipment
Frequency immunity tests
GB 14598.27-2008 metric Part 27 relays and protection equipment. Product safety requirements […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29322-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29322-2012
$345.00