GB/T 29300-2012Dry physical (pulverized) color toner (English PDF)
干式物理法（粉碎法）彩色墨粉
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29300-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
June 1, 2013
Scope
GB/T 29300-2012 is the English-translated version of 干式物理法（粉碎法）彩色墨粉.
GB/T 29300-2012 is the Chinese standard "Dry physical (pulverized) color toner".
Its scope clause reads: This standard specifies the color toner (hereinafter referred to as the product) free dry electrostatic imaging physical method (crushing method), technical requirements, test side Method, inspection rules and signs, packaging, transportation and storage.
This standard applies to digital imaging modalities electrostatic color copiers and color multifunction machine has a copy function using a dry physical Method (crushing method) color toner. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29300-2012
National Standard of the People's Republic of China
- ICS
- 37.100.20
- Classification
- G 81
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Product Category
- 5 Requirement
- 5.1 working conditions
- 5.2 resistance to transport, storage and environmental performance
- 5.3 Appearance
- 5.4 Coarse
- 5.5 Particle Size Distribution
- 5.7 degree of agglutination or bulk density
- 5.8 charge to mass ratio (analog band power)
- 5.9 agglomeration of
- 5.11 Hazardous Substances
- 5.12 Printing Quality
- 5.13 Durability
- 5.14 environmental adaptability
- 5.15 Mixed Test
- 5.16 toner consumption or print volume
- 6 Test Method
- 6.1 Test conditions
- 6.2 resistance to transport, storage and environmental test
- 6.3 Appearance
- 6.4 Coarse
- 6.7 degree of agglutination
- 6.8 Bulk Density
- 6.9 charge to mass ratio (analog band power)
- 6.10 agglomeration of
- 6.11 moisture
- 6.12 Hazardous Substances
- 6.13 Printing Quality
- 6.14 Durability Test
- 6.15 Environmental Adaptability Test
- 6.17 toner consumption
- 6.18 print volume
- 7 inspection rules
- 7.1 Inspection classification
- 7.2 factory inspection
- 7.3 Type inspection
- 8 signs, packaging, transportation and storage
- 8.1 Mark, packing
- Appendix A (normative) Test Method for Softening Point
- Appendix B (normative) Bulk Density Test Method
- Appendix E (normative) Test Method 22 consumption of flour
1 Scope
This standard specifies the color toner (hereinafter referred to as the product) free dry electrostatic imaging physical method (crushing method), technical requirements, test side
Method, inspection rules and signs, packaging, transportation and storage.
This standard applies to digital imaging modalities electrostatic color copiers and color multifunction machine has a copy function using a dry physical
Method (crushing method) color toner.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
Programme (ISO 2859-1.1999, IDT)
GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 21199-2007 laser printer dry one-component developer
GB/T 28625 color copier Beta
GB/T 28626 color copier image quality evaluation method
Dry toner caking temperature test method JB/T 8262.1 xerography
Dry toner charge to mass ratio test method JB/T 8262.2 xerography
JB/T 8262.3 xerographic toner dry moisture content Test Method
JB/T 8262.4 xerographic dry toner particle size distribution - Test methods
JB/T 8392 Dry xerographic toner melt index measurement method
JB/T 9444.2 copying machinery - Basic environmental test methods - Test A. Cold Test
JB/T 9444.4 copying machinery - Basic environmental test methods Test C. Damp heat test
SJ/T 11363 electronic information products of toxic and hazardous substances in requirements
Detection SJ/T 11365 electronic information products of toxic and hazardous substances
Measurement toner cartridge assembly print volume of ISO /IEC 19798 color printers and multifunction devices contain components of print (Methodforthedeterminationoftonercartridgeyieldforcolourprintersandmulti-functiondevices thatcontainprintercomponents)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Physical methods (crushing method) Toner physical (pulverized) toner
The binder resin, a colorant, and other additives were melt-kneaded, cooled after compression, and then coarsely pulverized, finely pulverized and classified to obtain the
Toner.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29300-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 29300-2012
$435.00