GB/T 29183-2012Infrared thermographic inspection - General technical requirements of in-situ inspection on construction engineering (English PDF)
红外热像法检测 建设工程现场通用技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29183-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
June 1, 2013
Scope
GB/T 29183-2012 is the English-translated version of 红外热像法检测 建设工程现场通用技术要求.
GB/T 29183-2012 is the Chinese standard "Infrared thermographic inspection - General technical requirements of in-situ inspection on construction engineering". Its scope clause reads: This standard specifies the infrared thermal imaging method in the construction field testing of the technical requirements.
This standard applies to Thermal imaging field testing building facades wet paste job quality decorative materials, building thermal envelope defect structure, Roof leaks, the building envelope airtightness, Port Engineering massive concrete surface defects, plant damage lining, industrial insulation effect really means Construction quality recognition, quality asphalt paving and other construction projects. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29183-2012
National Standard of the People's Republic of China
- ICS
- 17.220
- Classification
- A 56
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 2 Technical conditions
- 5 3 site inspection
- 6 detects data processing and results expression
- 7 Test Report
1 Scope
This standard specifies the infrared thermal imaging method in the construction field testing of the technical requirements.
This standard applies to Thermal imaging field testing building facades wet paste job quality decorative materials, building thermal envelope defect structure,
Roof leaks, the building envelope airtightness, Port Engineering massive concrete surface defects, plant damage lining, industrial insulation effect really means
Construction quality recognition, quality asphalt paving and other construction projects.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 12604.9 Terminology for nondestructive testing infrared detector
GB/T 20737 Non-destructive testing - General terms and definitions
JJF1187-2008 thermal imager calibration specification
3 Terms and Definitions
GB/T 12604.9, GB/T 20737 and as defined in the following terms and definitions apply to this document.
3.1 Radiant Flux
Per unit time in the form of radiation emission, propagation and reception of energy in watts (W).
3.2 Radiance
Unit projected area in the unit solid angle from the source of radiation flux, in units of watts per square meter steradian.
3.3 Reflectance
Radiation reflected from the object surface flux incident on the ratio of the flux of radiation on the surface.
3.4 Emissivity
At a given temperature, a radiation brightness of the object and at the same temperature than the corresponding radiance of a blackbody.
3.5 Blackbody
For any incident direction and wavelength of the incident radiation can absorb all of the heat radiating body ideal. Also known as Planck's radiation radiator or completely body. Its transmission rate is equal to 1.
3.6 Infrared radiation
Generally it refers to a wavelength band of 0.75µm ~ 1000µm electromagnetic waves.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29183-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 29183-2012
$195.00