GB/T 29050-2012Anti-rutting agent asphalt concrete for road engineering (English PDF)
道路用抗车辙剂沥青混凝土
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29050-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
September 1, 2013
Scope
GB/T 29050-2012 is the English-translated version of 道路用抗车辙剂沥青混凝土.
GB/T 29050-2012 is the Chinese standard "Anti-rutting agent asphalt concrete for road engineering". Its scope clause reads: This standard specifies the terms and definitions for road asphalt concrete anti-rutting agent, requirements, test methods, inspection rules and transport.
This standard applies to adding anti-rutting agent-road testing and use of asphalt concrete. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29050-2012
National Standard of the People's Republic of China
- ICS
- 93.080.20
- Classification
- Q 20
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Asphalt concrete anti-rutting agent
- 3.2 MFR meltmass-flowrate (MFR)
- 3.3 Dynamic Stability
- 3.4 Residual stability
- 3.5 Freeze-thaw splitting retained strength than freeze-thawsplittingtensilestrengthratio
1 Scope
This standard specifies the terms and definitions for road asphalt concrete anti-rutting agent, requirements, test methods, inspection rules and transport.
This standard applies to adding anti-rutting agent-road testing and use of asphalt concrete.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
1033.1 Non-plastic foam density measurement GB/T Part 1. Immersion method, liquid pyknometer method and titration method
Determination of GB/T 1034 plastic water absorption
Determination of GB/T 3682 thermoplastic melt flow rate and melt volume flow rate
JTGE20-2011 Highway Engineering asphalt and asphalt testing procedures
JTGF40-2004 asphalt pavement construction specifications
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Asphalt concrete anti-rutting agent
After a certain process of synthetic polymers to improve asphalt concrete rutting resistance of Mixed modifier.
3.2 MFR meltmass-flowrate (MFR)
Asphalt concrete anti-rutting agent at a certain temperature and pressure, melt in 10min by standard capillary weight value.
3.3 Dynamic Stability
After a predetermined condition when the asphalt concrete rutting test, the deformation of the specimen into the stable, each generating 1mm tread deformation test of the wheel
Walking times.
3.4 Residual stability
Marshall stability and not soggy standard Marshall stability at a temperature of water for a certain time after the asphalt concrete specimens
Ratio.
3.5 Freeze-thaw splitting retained strength than freeze-thawsplittingtensilestrengthratio
Under specified conditions of asphalt concrete specimens were freeze-thaw cycles, then splitting strength test specimens before and after freezing and thawing by splitting
Intensity ratio.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29050-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29050-2012
$125.00