GB/T 29003-2012Head-feed combine harvester - Evaluation index and measurement methods for fuel consumption (English PDF)
半喂入联合收割机 燃油消耗量指标及测量方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29003-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
July 1, 2013
Scope
GB/T 29003-2012 is the English-translated version of 半喂入联合收割机 燃油消耗量指标及测量方法.
GB/T 29003-2012 is the Chinese standard "Head-feed combine harvester - Evaluation index and measurement methods for fuel consumption". Its scope clause reads: This standard specifies the semi-feeding combine harvester fuel consumption test conditions, measurement method, fuel consumption evaluation.
This standard applies to semi-feeding combine harvester (hereinafter referred to as the harvester).
Found what you need?
Document preview — GB/T 29003-2012
National Standard of the People's Republic of China
- ICS
- 65.060.50
- Classification
- B 91
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3.1 Meteorological Condition
- 3.2 Test Conditions
- 3.3 Crops
- 3.4 prototype status
1 Scope
This standard specifies the semi-feeding combine harvester fuel consumption test conditions, measurement method, fuel consumption evaluation.
This standard applies to semi-feeding combine harvester (hereinafter referred to as the harvester).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
General provisions GB/T 5262 agricultural machinery testing conditions determination method
GB/T 20790 semi-feed combine harvester technical conditions
Test Conditions
3.1 Meteorological Condition
Temperature measurement should be 5 °C ~ 35 °C, atmospheric pressure 100kPa ~ 105kPa, relative humidity of 30% to 75%, from the ground 1.2m height
Wind speed is not greater than 3m/s of no rain, no fog, no dew crop surface under conditions.
3.2 Test Conditions
Length of paddy test be not less than 100m, a width of not less than 8 times the working width detected by paddy soil at a depth of 7.5cm
Firmness should not be less than 350kPa. There should be no ridge without clods or stones larger than 5cm, field longitudinal slope and transverse slope should not exceed
0.1%.
3.3 Crops
Detection of the crop should be ripe stage, should be no more than 20cm from the surface of weeds, crop-free lodging, density and degree of growing evenly. Rice
Natural height of about 90cm ± 10cm, ear width is not more than 250mm, grain moisture content of 18% to 25%, a water content of 35% to straw
55% yield was 7500kg/hm2 ~ 8250kg/hm2.
3.4 prototype status
3.4.1
harvester measured shall comply with GB/T 20790 and consistent with random technical documents, maintaining the normal state of the art.
Fuel 3.4.2 shall be measured with No. 0 diesel. Repeated measurements should use the same batch of fuel.
3.4.3
measured harvesters should maintain maximum design total mass. Car occupants (including the driver) shall comply with the number of random technical documents,
It can be used instead of the occupant weight placed in the appropriate position, press 75kg per meter (upper seat 65kg, front floor 10kg).
3.4.4
should be emptied before each test barn.
3.4.5
before measuring, the measured harvester should be preheated, so that all parts reach normal operating temperature. Xie Xie organic food means, grain harvester
Gyeonggi should fill grain (grain tank auger cover, the vertical height should not exceed 10cm).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29003-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 29003-2012
$105.00