GB/T 29002-2012Whole-feed combine harvester - Evaluation index and measurement methods for fuel consumption (English PDF)
全喂入联合收割机 燃油消耗量指标及测量方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29002-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
July 1, 2013
Scope
GB/T 29002-2012 is the English-translated version of 全喂入联合收割机 燃油消耗量指标及测量方法.
GB/T 29002-2012 is the Chinese standard "Whole-feed combine harvester - Evaluation index and measurement methods for fuel consumption". Its scope clause reads: This standard specifies the full-feeding combine harvester fuel consumption test conditions, measurement method, fuel consumption evaluation.
This standard applies to wheeled and tracked full-feeding combine harvester (hereinafter referred to as the harvester).
Found what you need?
Document preview — GB/T 29002-2012
National Standard of the People's Republic of China
- ICS
- 65.060.50
- Classification
- B 91
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3.1 Meteorological Condition
- 3.2 Test Conditions
- 3.3 Crops
- 3.4 prototype status
1 Scope
This standard specifies the full-feeding combine harvester fuel consumption test conditions, measurement method, fuel consumption evaluation.
This standard applies to wheeled and tracked full-feeding combine harvester (hereinafter referred to as the harvester).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
General provisions GB/T 5262 agricultural machinery testing conditions determination method
JB/T 5117 full-feeding combine technical conditions
Test Conditions
3.1 Meteorological Condition
Temperature measurement should be 5 °C ~ 35 °C, atmospheric pressure 95kPa ~ 105kPa, relative humidity of 30% to 75%, from the ground 1.2m height
Wind speed is not greater than 3m/s of no rain, no fog, no dew crop surface under conditions.
3.2 Test Conditions
Rice (wheat) field test area should not be less than the length of 100m, a width of not less than 8 times the working width. Detecting paddy 7.5cm depth
Soil firmness should not be less than 350kPa, wheat field not less than 500kPa; 15cm ~ 20cm of the soil compactness should not be less than 7.5cm at Kennedy
Solidity. There should be no ridge and no more than 5cm clods or stones, fields, longitudinal slope and transverse slope should not exceed 0.3%.
3.3 Crops
Detection of the crop should be ripe stage, should be no more than 20cm from the surface of weeds, crop-free lodging, density and degree of growing evenly. wheat
Natural height 80cm ± 10cm, Grass Valley ratio of 0.8 to 1.0, the grain moisture content of 12% to 20%, straw moisture content of 20% to 30% yield
An amount of 5250kg/hm2 ~ 6750kg/hm2. Rice natural height 90cm ± 10cm, Grass Valley ratio of 1.5 to 1.9 and a moisture content of grain
18% to 25%, straw moisture content of 35% to 55%, a yield of 7500kg/hm2 ~ 8250kg/hm2.
Wheel wheat combine harvester income test; crawler rice combine harvesters income test.
3.4 prototype status
3.4.1
harvester measured shall comply with JB/T 5117 and consistent with the random technical documents, maintaining the normal state of the art.
3.4.2
Fuel measurement should be No. 0 diesel. Repeated measurements should use the same batch of fuel.
3.4.3
measured harvesters should maintain maximum design total mass. Car occupants (including the driver) shall comply with the number of random technical documents,
It can be used instead of the occupant weight placed in the appropriate position, press 75kg per meter (upper seat 65kg, front floor 10kg).
3.4.4
should be emptied before each test barn.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29002-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 29002-2012
$105.00