Valid

GB/T 2900.26-2008Electrotechnical terminology - Electrical machine for automatic control system (English PDF)

电工术语控制电机

Preview PDF

This is a limited preview

Buy now to download the full PDF (47 pages)

Need quotation for your management?

Get a formal quotation for GB/T 2900.26-2008 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 30, 2008

Implementation date

April 1, 2009

Scope

GB/T 2900.26-2008 is the English-translated version of 电工术语控制电机.

GB/T 2900.26-2008 is the Chinese standard "Electrotechnical terminology - Electrical machine for automatic control system". Its scope clause reads: This section GB/T 2900 specifies the motor control terminology.

This section applies to the development of standards, technical documents, professional preparation and translation of manuals, textbooks and books.

The term should be GB/T 2900.1 and GB/T 2900.25 used in conjunction with the provisions of this section; this section is not specified term needs That may be granted in the relevant provisions of the standard. Its clauses include general terms and product names.

Found what you need?

Document preview — GB/T 2900.26-2008

National Standard of the People's Republic of China

ICS: 29.160.30
Classification: K 24
Replacing: GB/T 2900.26-1994

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 1 General terms and product names
4 main components, Annex
5 characteristics and parameters
6 Test

1 Scope

This section GB/T 2900 specifies the motor control terminology.

This section applies to the development of standards, technical documents, professional preparation and translation of manuals, textbooks and books.

The term should be GB/T 2900.1 and GB/T 2900.25 used in conjunction with the provisions of this section; this section is not specified term needs

That may be granted in the relevant provisions of the standard.

2 Normative references

The following documents contain provisions which, through reference to GB/T 2900 to the present, constitute provisions of this section. For dated reference documents

Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section

Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 2900.1-1992 Electrical Basic terminology

GB/T 2900.25-1994 Electrotechnical terminology rotary motor

3 General terms and product names

3.1 General terms

3.1.1

For condition monitoring, signal processing and servo drives and other uses in the automatic control system of various motors, electrical components and systems.

3.1.2

In the control motor, for detecting the position, velocity, current, etc., components or techniques.

3.1.3

From the heat source (windings, core, etc.) within the motor to heat flow impedance between the cooling medium.

3.1.4 FIG

1 is at a maximum continuous torque and the maximum allowable operating speed and the rated speed within the work area (shaded area in Figure 1), it

By the heat of the motor, the mechanical strength by the centrifugal force of the commutation (or commutation) or drive a range of extreme operating conditions. in

Within this area of continuous operation, the motor and the drive will not exceed its maximum allowable temperature.

Note 1. The rated power PN (W), rated speed like N (r/min) and maximum continuous torque relations TN (N · m) of PN =

2piTN like N

Note 2. For the band seals, brake motors and other accessories should be derated.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 47 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 13501-2026|GB/T 47160-2026|GB/T 47845-2026|GB/T 25302-2025|GB/T 30143-2025|GB/T 30145-2025

Editions of GB/T 2900.26

Edition	Title	Revision	Status
GB/T 2900.26-2008	Electrotechnical terminology - Electrical machine for automatic control system	current edition	Current
GB/T 2900.26-1994	Electrotechnical terminology - Electrical machine for automatic control system	previous edition	Superseded

This page sells the current edition, GB/T 2900.26-2008. Earlier editions are listed for reference only.

How to Download GB/T 2900.26-2008

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.