GB/T 28878.9-2019Specification of the rotating component in space science experiments—Part 9: Delivery (English PDF)
空间科学实验转动部件规范 第9部分：交付
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28878.9-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
October 1, 2019
Scope
GB/T 28878.9-2019 is the English-translated version of 空间科学实验转动部件规范 第9部分：交付.
GB/T 28878.9-2019 is Part 9 of GB/T 28878 and specifies the requirements for delivery preparation, delivery inspection and product delivery of the rotating components used in space science experiments.
In delivery preparation the contractor self-inspects the product against the contract, the technical requirements and the product specification or acceptance test details, checks the process quality control, the quality assurance of raw and outsourced materials, the calibration of test and measuring equipment and the records of quality problems and corrective actions, and inspects the delivery documents, the certificate and resume, the test and reliability test reports and the instruction manual.
Rotating components of other payloads and spacecraft platforms can refer to it. Terms follow GB/T 28878.1, and GB/T 14481-2008, GB/T 20638-2006 and GB/T 25915.1-2010 are also cited. It was issued on 4 June 2019 and has applied since 1 October 2019.
Found what you need?
Document preview — GB/T 28878.9-2019
National Standard of the People's Republic of China
- ICS
- 49.035
- Classification
- V 22
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative references4
- 3 Terms and definitions4
- 4 Delivery preparation4
- 5 Delivery inspection5
- 6 Product delivery7
1 Scope
This Part of GB/T 28878 specifies the requirements for the delivery preparation, delivery inspection and product delivery of rotating component.
This Part applies to the delivery of rotating component in space science experiments. The delivery of rotating component of other payloads and spacecraft platforms can refer to it for use.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 14481-2008, Test procedure for single-phase synchronous machines
GB/T 20638-2006, General specification for stepping motors
GB/T 25915.1-2010, Cleanrooms and associated controlled environments. Part 1: Classification of air cleanliness
GB/T 28878.1, Specification of the rotating component in space science experiments. Part 1: General requirements of design
GB/T 28878.6-2016, Specification of the rotating component in space science experiments. Part 6: Property testing
3 Terms and definitions
Terms and definitions determined by GB/T 28878.1 are applicable to this document.
4 Delivery preparation
4.1 Product self-inspection
The delivered product shall be inspected by the contractor in accordance with the following documents:
a) contract (if any);
b) technical requirements (technical agreement or development task book);
c) product specifications or acceptance test details.
4.2 Quality control inspection
Before the product is delivered, the manufacturer shall check the product process control and prepare corresponding documents for the user to check. The quality control inspection shall include:
a) quality assurance of raw materials;
b) process quality control, including key parts, important parts, key processes and special process control records;
c) documents and records related to quality assurance of outsourced products;
d) calibration and verification of test equipment, measurement equipment and measuring instruments;
e) records of quality problems and corrective actions that are taken during production;
f) other quality control conditions that shall be checked.
4.3 Delivery document inspection
The delivery documents shall be inspected before delivery, including:
a) certificates and resumes;
b) test report;
c) reliability test report;
d) instruction manual. […]
5 Delivery inspection
5.1 Inspection responsibility
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 14481-2008Test procedure for single-phase synchronous machines
- GB/T 20638-2006General specification for stepping motors
- GB/T 25915.1-2010Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration
- GB/T 28878.1Specification of the rotating component in space science experiments - Part 1: General requirements of design
- GB/T 28878.6-2016Specification of the rotating component in space science experiments—Part 6: Property testing
Similar standards
How to Download GB/T 28878.9-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 14481-2008 — Test procedure for single-phase synchronous machines
GB/T 28878.1-2012 — Specification of the rotating component in space science experiments - Part 1: General requirements of design
GB/T 28878.10-2019 — Specification of the rotating component in space science experiments—Part 10: Storage and reinspection
Secure payment via Stripe
Payments accepted
GB/T 28878.9-2019
$75.00