GB/T 28466-2012Polyester filament embroidery threads (English PDF)
涤纶长丝绣花线
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28466-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 29, 2012
Implementation date
December 1, 2012
Scope
GB/T 28466-2012 is the English-translated version of 涤纶长丝绣花线.
GB/T 28466-2012 is the Chinese standard "Polyester filament embroidery threads". Its scope clause reads: This Standard specifies classification, requirements, grading rules, test methods, acceptance rules as well as packaging, marks, storage and transportation for polyester filament embroidery threads.
This Standard is applicable to polyester filament embroidery threads. Its clauses include classification; requirements; grading rules; test methods; acceptance rules; packaging, marks, storage and transportation.
It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on JUNE 29, 2012 and took effect on DECEMBER 01, 2012.
Found what you need?
Document preview — GB/T 28466-2012
National Standard of the People's Republic of China
- ICS
- 59.080.20
- Classification
- W 58
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative references4
- 3 Classification5
- 4 Requirements5
- 5 Grading rules7
- 6 Test methods7
- 7 Acceptance rules9
- 8 Packaging, marks, storage and transportation10
- Annex A (informative) Reference values of twist degree and filament cross section of polyester filament embroidery threads11
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This Standard specifies classification, requirements, grading rules, test methods, acceptance rules as well as packaging, marks, storage and transportation for polyester filament embroidery threads. This Standard is applicable to polyester filament embroidery threads.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250, Textiles - Tests for colour fastness - Grey scale for assessing change in colour
GB/T 251, Textiles - Tests for colour fastness - Grey scale for assessing staining
GB/T 3916, Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break
GB/T 3920, Textiles - Tests for colour fastness - Colour fastness to rubbing
GB/T 3921-2008, Textiles - Tests for colour fastness - Colour fastness to washing with soap or soap and soda
3 Classification
Polyester filament embroidery threads, according to different processes, are classified into.
4 Requirements
4.1 The requirements for polyester filament embroidery threads are divided into internal quality and appearance quality.
4.2 See Table 1 for single thread breaking strength requirements for polyester filament embroidery threads.
4.4 See Table 3 for requirements for appearance quality of polyester filament embroidery threads.
4.6 Refer to Annex A for the twist and cross-section reference values of polyester filament embroidery threads.
5 Grading rules
5.1 Grading of finished product quality
The quality of finished polyester filament embroidery threads is graded into high-class product, first-class product and conforming product.
5.2 Assessment rules
6 Test methods
6.1 Linear density test
The test method of linear density is carried out according to procedure 3 in GB/T 4743-2009. The linear density deviation rate is calculated according to formula (1). The result retains 2 significant digits.
6.3 Length test
6.3.1 The length measuring device used for length test shall meet the requirements of GB/T 4743.
6.3.2 When testing the length, the pre-tension of single thread is (0.5±0.1)cN/tex.
6.4 Test of color fastness to soaping
According to the provisions of test method C (3) in GB/T 3921-2008.
6.5 Test for color fastness to rubbing
According to GB/T 3920.
6.6 Test of color fastness to heat pressing
According to dry pression at a temperature of (150±2)°C in GB/T 6152-1997.
6.7 Test method for the number of knots
Fix the embroidery thread tube. On the embroidery thread rewinding machine, use mechanical yarn clearer to test.
6.8 Appearance quality inspection
7 Acceptance rules
7.1 Sampling
Take the products of the same variety, same specification and same color as an inspection lot. See Table 4 for rules on sample quantity extracted per batch for internal quality as well as number of tests. See Table 5 for rules on sampling quantity for appearance quality inspection.
7.2 Evaluation of results
7.2.1 The internal quality shall meet the requirements of 4.2 and 4.3. If there is any non-conformity in the inherent quality, the same quantity of products can be re-inspected. The re-inspection result is the final result of the batch of products.
7.2.2 The appearance quality shall meet the requirements of 4.4. If the appearance quality does not meet the rate of 5% or less, the products that do not meet the requirements shall be replaced on site.
8 Packaging, marks, storage and transportation
8.1 Packaging
Products are packed in boxes according to different colors, varieties, specifications, batch numbers and grades. Mixed packing is prohibited.
8.2 Marks
8.3 Transportation
The product shall be tightly covered during transportation. The product cannot be exposed to rain, moisture, sun exposure and high temperature to prevent deterioration.
Annex A (informative)
Reference values of twist degree and filament cross section of polyester filament embroidery threads See Table A.1 for reference values of twist degree and filament cross section of polyester filament embroidery threads. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 250Textiles -- Tests for colour fastness -- Grey scale for assessing change in colour
- GB/T 251Textiles -- Tests for colour fastness -- Grey scale for assessing staining
- GB/T 3916Textiles -- Yarns from packages -- Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
- GB/T 3920Textiles - Tests for colour fastness - Colour fastness to rubbing
- GB/T 3921-2008Textiles - Tests for Colour Fastness - Colour Fastness to Washing with Soap or Soap and Soda
Cited by
- GA 255-2022Police uniform - Long-sleeve uniform shirt
- GA 568-2022Police uniform -Summer short-sleeve shirt for policeman on duty
- GA 255-2009Police uniform - Long-sleeve uniform shirt
- GA 568-2009Police uniform -Summer short-sleeve shirt for policeman on duty
- GA 568-2005Police uniform -Summer short-sleeve shirt for policeman on duty
- GA 255-2000Police uniform - Long-sleeve uniform shirt
Similar standards
How to Download GB/T 28466-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 250-2008 — Textiles -- Tests for colour fastness -- Grey scale for assessing change in colour
GB/T 251-2008 — Textiles -- Tests for colour fastness -- Grey scale for assessing staining
GB/T 3916-1983 — Method for determination of breaking strength and elongation of single strands
GB/T 28466-2012
$145.00