Valid

GB/T 28180-2011Guide of eco-design for power and distribution transformers (English PDF)

变压器环境意识设计导则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28180-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 30, 2011

Implementation date

June 1, 2012

Scope

GB/T 28180-2011 is the English-translated version of 变压器环境意识设计导则.

GB/T 28180-2011 is the Chinese standard "Guide of eco-design for power and distribution transformers".

Its scope clause reads: This standard specifies eco-design requirement and environmental aspect, material usage and manufacture, transportation and marketing, application as well as end of service life of power and distribution transformers (hereinafter referred to as transformers).

This standard is applicable to the environmentally conscious design of transformers within the range specified in GB 1094.1 and relevant transformer products. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 28180-2011

National Standard of the People's Republic of China

ICS
29.020
Classification
K 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword i
  • Introduction
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Eco-design Requirement and Environmental Aspect
  • 5 Material Usage and Manufacture
  • 6 Transportation and Marketing
  • 7 Application Stage
  • 8 End of Service Life
  • 9 Documentation
  • Annex A (Informative) Examples of Disposal Scheme for Parts and Components of Discarded Transformer
  • .detail td {

1 Scope

This standard specifies eco-design requirement and environmental aspect, material usage and manufacture, transportation and marketing, application as well as end of service life of power and distribution transformers (hereinafter referred to as transformers).

This standard is applicable to the environmentally conscious design of transformers within the range specified in GB 1094.1 and relevant transformer products.

2 Normative References

The following documents for the application of this document are essential. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendment) applies.

GB 1094.1 Power Transformers - Part 1: General

GB 1094.5 Power Transformers - Part 5: Ability to Withstand Short Circuit

GB/T 1094.7 Power Transformers - Part 7: Loading Guide for Oil-immersed Power Transformers

GB/T 1094.10 Power Transformers - Part 10: Determination of Sound Levels

GB 1094.11 Power Transformers - Part 11: Dry-type Transformers

GB/T 1094.101 Power Transformers - Part 10.1: Determination of Sound Levels - Application Guide

GB 3096 Environmental Quality Standards for Noise

GB/T 10228 Specification and Technical Requirements for Dry-type Power Transformers

GB/T 13499 Power Transformers - Application Guide

GB 18455 Package Recycling Marking

GB 20052 The Minimum Allowable Values of Energy Efficiency and the Evaluating Values of Energy Conservation for Three-phase Distribution Transformers

GB/T 23686 Environmentally Conscious Design Guide for Electrical and Electronic Products

GB/T 23688-2009 Guide of Eco-design for Energy-using Products

GB 24790 Minimum Allowable Values of Energy Efficiency and the Energy Efficiency Grades for Power Transformers

GB/T 28179 Environmentally Conscious Design for Electrical and Electronic Product - Identification of Environmental Aspects

GB/Z 21274-2007 Determination of Regulated Substances (Lead, Mercury and Cadmium) in Electrical and Electronic Equipment

GB/Z 21275-2007 Determination of Regulated Substance (Hexavalent Chromium) in Electrical and Electronic Equipment

GB/Z 21276-2007 Determination of Restricted Substances - Polybrominated Biphenyls and Polybrominated Diphenyl Ethers in Electrical and Electronic Equipment

GB/Z 21277-2007 Rapid Screening of Lead, Mercury, Chromium, Cadmium and Bromine of Regulated Substances in Electrical and Electronic Equipment - X-ray Fluorescence Spectrometry

SN/T 2003.1-2005 Determination of Lead, Mercury, Cadmium, Chromium and Bromine in Electrical and Electronic Equipment - Part 1: Qualitative Screening by Wavelength Dispersive X-ray Fluorescence Spectrometric Method

SN/T 2004.1-2005 Determination of Mercury in Electrical and Electronic Equipment - Part 1: Hydride Generation-Atomic Fluorescence Spectrometric Method

SN/T 2004.2-2005 Determination of Lead, Cadmium and Chromium in Electrical and Electronic Equipment - Part 2: Flame Atomic Absorption Spectrometric Method

SN/T 2004.3-2005 Determination of Chromium(VI) in Electrical and Electronic Equipment - Part 3: 1.5 Diphenylcarbahydrazide Spectrophotometric Method

SN/T 2005.1-2005 Determination of Polybromobiphenyls and Polybromobiphenyl Ethers in Electrical and Electronic Equipment - Part 1: High Performance Liquid Chromatography Method

SN/T 2005.2-2005 Determination of Polybromobiphenyls and Polybromobiphenyl Ethers in Electrical and Electronic Equipment - Part 2: GC-MS Method

DL/T 572 Operation Specification for Power Transformer

DL/T 573 Maintenance Guide for Power Transformers

DL/T 985 Guide for Determining Energy Efficiency for Distribution Transformers

JB/T 10088 Sound Level for 6kV~500kV Power Transformers

IEC 60076-12 Power Transformers - Part 12: Loading Guide for Dry-type Power Transformers

IEC 60076-14 Power Transformers - Part 14: Design and Application of Liquid-immersed Power Transformers Using High-temperature Insulation Materials

3 Terms and Definitions

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28180-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28180-2011

$185.00