GB/T 28118-2011Plastics and aluminum foil laminated films and pouches for food packaging (English PDF)
食品包装用塑料与铝箔复合膜、袋
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28118-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
August 1, 2012
Scope
GB/T 28118-2011 is the English-translated version of 食品包装用塑料与铝箔复合膜、袋.
GB/T 28118-2011 is the Chinese standard "Plastics and aluminum foil laminated films and pouches for food packaging".
Its scope clause reads: This standard specifies the use of plastic food packaging and aluminum foil composite film, bags abbreviations, symbols and definitions, classification, requirements, test methods, marking Chi, packaging, transport and storage.
This standard applies to less than 0.25mm thickness using a temperature below 70 °C to plastic, aluminum foil as the substrate composite, for food packaging Fitted with a film bag. Its clauses include abbreviations, symbols, terms and definitions.
Found what you need?
Document preview — GB/T 28118-2011
National Standard of the People's Republic of China
- ICS
- 83.140.10
- Classification
- G 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 abbreviations, symbols, terms and definitions
- 3.1 Abbreviations
- 3.2 Symbols
- 3.3 Terms and Definitions
- 4 Category
- 5 requires
- 5.1 Sensory
- 5.1.1 Appearance quality
- 5.1.2 Printing
- 5.1.3 barcode printing
- 5.1.4 odor
- 5.2 size deviation
- 5.2.1 film roll size deviation
- 5.2.2 pouch size deviation
- 5.2.3 joint
- 5.2.4 film roll core size and deviation
- 5.3 Physical and mechanical properties
- 5.3.1 Physical properties
- 5.3.2 bag pressure resistance
- 5.3.3 bag drop performance
- 5.4 Health performance
- 5.5 Residual Solvents
- 6 Test methods
- 6.1 standard environment for conditioning and testing
- 6.2 Sensory
- 6.2.1 film, visual quality bag
- 6.2.2 Printing Quality
- 6.2.3 Barcode printing
- 6.2.4 odor
- 6.3 size deviation
- 7 6.4 Physical and mechanical properties
- 6.4.1 Tensile strength
- 6.4.2 peel force
- 6.4.3 heat seal strength
- 6.4.4 OTR
- 6.4.5 Water vapor transmission
- 6.4.6 pressure resistance
- 6.4.7 Performance drop
- 6.5 Performance 7 Health
- 6.6 solvent residue
- 7 inspection rules
- 7.1 Batch
- 7.2 Sampling Method
- 7.3 sampling plan and decision rules
- 7.4 factory inspection items
- 7.5 Type inspection
- 7.5.1 Type inspection items
- 7.5.2 Special Inspection item
- 8 signs, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transport
- 8.4 Storage
1 Scope
This standard specifies the use of plastic food packaging and aluminum foil composite film, bags abbreviations, symbols and definitions, classification, requirements, test methods, marking
Chi, packaging, transport and storage.
This standard applies to less than 0.25mm thickness using a temperature below 70 °C to plastic, aluminum foil as the substrate composite, for food packaging
Fitted with a film bag.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB 1037 plastic film and sheet water vapor permeability test methods Cup Method
GB/T 1038 plastic film and sheeting gas permeability test pressure method
Test conditions for films and sheets. plastic 1040.3 Determination of tensile properties GB/T Part 3
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
GB/T 2918 plastic sample conditioning and testing of the standard environment
GB/T 5009.60 food packaging, polyethylene, polystyrene, polypropylene moldings health standard analytical methods
GB /5009.119 Determination composite food packaging diaminotoluene T
GB/T 6672 plastic film and sheeting - Determination of thickness by mechanical scanning
Determination of GB/T 6673 plastic film and sheet length and width
GB/T 7707 intaglio decoration print
GB/T 8808 soft composite plastic material peeling test methods
GB 9683 Hygienic standard for composite laminated food packaging bag
GB 9685 food containers and packaging materials additives health standards
GB 12904 barcode for commodity retail commodity numbering and bar code
GB/T 14257 goods bar code bar code symbol placement guidelines
GB/T 17497 flexographic printing and decorating
GB/T 18348 goods bar code bar code symbol print quality test
GB/T 19789 packaging material of plastic film and sheet oxygen permeability test coulometer detection
GB/T 21302 packaging film and pouch General
QB/T 2358 plastic film packaging bag heat sealing strength test method
3 abbreviations, symbols, terms and definitions
The following abbreviations, symbols, terms and definitions apply to this document.
3.1 Acronyms
AL foil
END: Draft Version (GB/T 28118-2011)
GB/T 25254-2022 | GB/T 32363.2-2015 | GB/T 31062-2014 | GB/T 10004-2026 | GB/T 28117-2026 | GB/T 28117-2011 |
Quality Assurance | How to buy PDFs? | FAQ Terms of Service | Contact Information | Privacy Policy | Refund Policy | Shipping Policy […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 28118-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 28118-2011
$195.00