GB/T 27875-2011Technical requirements for project and heavy lift cargoes handling in port (English PDF)
港口重大件装卸作业技术要求
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27875-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
June 1, 2012
Scope
GB/T 27875-2011 is the English-translated version of 港口重大件装卸作业技术要求.
GB/T 27875-2011 is the Chinese standard "Technical requirements for project and heavy lift cargoes handling in port".
Its scope clause reads: This standard specifies the basic requirements for major pieces of port loading and unloading, selection and use requirements stevedores attachments, as well as handling the technical requirements And methods of operation.
This standard applies to bulky and out of ports, growing parts of cargo and machinery, equipment and vehicles. Its clauses include terms and definitions; basic requirements.
Found what you need?
Document preview — GB/T 27875-2011
National Standard of the People's Republic of China
- ICS
- 03.220.40
- Classification
- R 43
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Basic requirements
- 6 handling technical requirements and methods of operation
- Annex B (informative) Calculation specifications sling
1 Scope
This standard specifies the basic requirements for major pieces of port loading and unloading, selection and use requirements stevedores attachments, as well as handling the technical requirements
And methods of operation.
This standard applies to bulky and out of ports, growing parts of cargo and machinery, equipment and vehicles.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 1835 Series 1 container corner fittings
GB/T 6067 crane safety regulations
JT/T 557 port handling area lighting illuminance and its measurement
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Heavy projectandheavyliftcargo
Heavy, growing parts of goods and all kinds of machinery, equipment and vehicles.
3.2 Bracket liftingspreader
For the major pieces when lifting sling to maintain a certain status, for vertical, horizontal or vertical and horizontal support a variety of structures.
3.3 Lifting balancing device
Adjusting and maintaining balance when lifting major pieces of various mechanical devices.
4 Basic requirements
4.1
in the loading and unloading of the major pieces of their division of labor personnel shall receive appropriate professional and technical training, and passing the examination.
4.2
According to the characteristics of the major pieces of loading and unloading, the operating environment should meet the following requirements.
a) loading and unloading operations in the region, the lighting illuminance shall comply with JT/T 557 requirements;
B) When wind speed is greater than 12m/s, should stop using the floating crane lifted a major piece work; wind speed greater than 15m/s, the weight should be stopped
Large lifting operations;
c) marked with signs of major pieces of moisture, rain and snow should stop at the open-air operations;
d) should be based on the actual situation of major pieces, equipped with appropriate fire safety facilities.
4.3
Before the job, you should understand the handling handling characteristics of major pieces and do the following.
GB 16994.6-2024 | GB 16994.5-2024 | GB 16994.4-2023 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 27875-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27875-2011
$345.00