GB/T 27708-2011General technical requirements of inflatable toys (English PDF)
充气玩具通用技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27708-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
July 1, 2012
Scope
GB/T 27708-2011 is the English-translated version of 充气玩具通用技术要求.
GB/T 27708-2011 is the Chinese standard "General technical requirements of inflatable toys". Its scope clause reads: This standard specifies the scope of inflatable toys, normative references, terms and definitions, requirements, test methods, defect classification and eligibility determination Fixed principles.
This standard applies to inflatable toys intended for children under 14 to play for use, including children playing with balloons, inflatable sports imitation play Tools (such as various types of ball), modeling inflatable toys, inflatable toys bearing (such as inflatable toys, furniture) and the like.
This standard does not apply to inflatable water toys, outdoor inflatable rides and intended for festivals, advertising, scientific investigation balloon. NOTE.
Universal Security inflatable toys required to meet the relevant requirements of GB 6675, GB 6675 Appendix A lists the safety requirements of the relevant inflatable toys. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 27708-2011
National Standard of the People's Republic of China
- ICS
- 97.200.50
- Classification
- Y 57
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 requires
- 5 Test Method
- 6 5 defect classification
- 7 qualified determination Principle
- Appendix A (Informative Appendix) GB 6675 applies inflatable toys related to general safety requirements Guide
1 Scope
This standard specifies the scope of inflatable toys, normative references, terms and definitions, requirements, test methods, defect classification and eligibility determination
Fixed principles.
This standard applies to inflatable toys intended for children under 14 to play for use, including children playing with balloons, inflatable sports imitation play
Tools (such as various types of ball), modeling inflatable toys, inflatable toys bearing (such as inflatable toys, furniture) and the like.
This standard does not apply to inflatable water toys, outdoor inflatable rides and intended for festivals, advertising, scientific investigation balloon.
NOTE. Universal Security inflatable toys required to meet the relevant requirements of GB 6675, GB 6675 Appendix A lists the safety requirements of the relevant inflatable toys.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 5296.5 consumer use - Part 5. Toys
GB 6675 (all parts) Toy Safety
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Inflatable toys
The latex or plastic (e.g., soft polyvinyl chloride film) and the like made by the internal air, nitrogen or the like inert gas filled toys, including the
Inflatable toys for children to play or pre-inflated, typically include such toys children play with balloons, inflatable sports imitation toys (such as ball games
Toys), modeling inflatable toys, inflatable toys bearing (such as inflatable furniture, toys) and the like.
Note. refers to the general latex rubber emulsion is easy to stretch, often called latex.
3.1.1 Children play with balloons playbaloon
Intended for children from the latex or plastic (such as soft polyvinyl chloride film) made play with balloons.
3.1.2 Inflatable Sports imitation toys
By the plastics, synthetic leather and other materials like sporting goods inflatable toys, including various types of inflatable toys ball (such as basketball, soccer, volleyball
Toys) and so on.
3.1.3 Inflatable Toys inflatablemodelingtoy modeling
It made of plastic (such as soft polyvinyl chloride film) in various shapes or other materials (such as humanoid, animals, etc.) of inflatable toys.
3.1.4 Inflatable toys bearing
It made of plastic (such as soft polyvinyl chloride film) or other materials, inflated toys intended to bear the mass of a child (such as inflatable furniture, toys).
GB/T 27689-2025 | GB 28482-2012 | GB 28265-2012 | GB/T 32441-2026 | GB/T 24914-2026 | GB/T 22788-2026 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 27708-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 27708-2011
$165.00