GB/T 27687-2011Scraps of molybdenum and molybdenum alloy (English PDF)
钼及钼合金废料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27687-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
October 1, 2012
Scope
GB/T 27687-2011 is the English-translated version of 钼及钼合金废料.
GB/T 27687-2011 is the Chinese standard "Scraps of molybdenum and molybdenum alloy". Its scope clause reads: This standard specifies the requirements for molybdenum and molybdenum alloy scrap, test methods, inspection rules, marking, packaging, transportation, storage, and quality certificate Contract (or purchase order) content.
This standard applies to molybdenum and molybdenum alloy waste (hereinafter referred to as waste). Its clauses include terms and definitions; requirements.
Found what you need?
Document preview — GB/T 27687-2011
National Standard of the People's Republic of China
- ICS
- 77.150.99
- Classification
- H 63
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
1 Scope
This standard specifies the requirements for molybdenum and molybdenum alloy scrap, test methods, inspection rules, marking, packaging, transportation, storage, and quality certificate
Contract (or purchase order) content.
This standard applies to molybdenum and molybdenum alloy waste (hereinafter referred to as waste).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 3461 molybdenum powder
GB/T 4325 (all parts), chemical analysis of molybdenum
Solid Waste Environmental protection control standard GB 16487.7 for imported raw materials non-ferrous metal scrap
GB/T 20927 titanium and titanium alloy scrap
YS/T 660 molybdenum and molybdenum alloy grades and chemical composition of processed products
3 Terms and Definitions
GB/T 20927 in the terms and definitions apply to this document.
4 Requirements
4.1 Classification
4.1.1
waste categories, groups are shown in Table 1.
Table 1
CLASS GROUP typical example
Class I. molybdenum metal scrap
Great big block massive waste scrap molybdenum and molybdenum alloy processed products in the processing, use generated
Small block small block scrap molybdenum and molybdenum alloy scrap processed products in the processing, use generated
Scrap crumb crumb-like molybdenum and molybdenum alloy scrap processed products in the processing, use generated
Waste powdery wastes in the production of molybdenum powder, produced using the process
II class. molybdenum smelting waste
Molybdenum slag containing molybdenum smelting slag
Molybdenum containing molybdenum gray dust, smoke, etc.
Molybdenum and molybdenum-containing dust mud water leaching precipitate
III categories. molybdenum chemical waste
Ammonium molybdate slag tailings produced during the synthesis
Molybdenum oxide and molybdenum-containing waste material including mainly salt molybdate, molybdenum oxide, molybdenum oxide hydroxide, oxide waste
Other chemical waste
Including catalysts, lubricants, pigments, molybdate inhibitor, smoke suppressants and other production suppressant
And use of the process to produce molybdenum-containing waste
GB/T 37204-2018 | GB/T 21183-2017 | GB/T 26283-2010 | GB/T 44327-2024 | GB/T 23271-2023 | GB/T 27688-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 27687-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27687-2011
$105.00