Valid

GB/T 27611-2011General requirements and labeling for recycled and remanufactured products (English PDF)

再生利用品和再制造品通用要求及标识

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 27611-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 5, 2011

Implementation date

May 1, 2012

Scope

GB/T 27611-2011 is the English-translated version of 再生利用品和再制造品通用要求及标识.

GB/T 27611-2011 is the Chinese standard "General requirements and labeling for recycled and remanufactured products". Its scope clause reads: This Standard specifies the general requirements and labeling for recycled products (also known as regenerated products) and remanufactured products (also known as remanufactured goods).

This Standard applies to the manufacture and trade of recycled and remanufactured products, but not to remanufactured automobiles and their components and parts.

Its clauses include definitions; general requirements; labeling for recycled and remanufactured products. It was issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on DECEMBER 5, 2011 and took effect on MAY 1, 2012.

Found what you need?

Document preview — GB/T 27611-2011

National Standard of the People's Republic of China

ICS: 13.020.10
Classification: Z 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword3
1 Scope4
2 Normative References4
3 Definitions4
4 General Requirements5
5 Labeling for Recycled and Remanufactured Products5
Appendix A (informative) Relevant Standards on Technical Requirements for Some Recycled and Remanufactured Products9
Appendix B (normative) Style and Size of Labeling Graph10
Bibliography12

Foreword

This Standard was drafted in accordance with the rules provided in GB/T 1.1-2009.

1 Scope

This Standard specifies the general requirements and labeling for recycled products (also known as regenerated products) and remanufactured products (also known as remanufactured goods).

This Standard applies to the manufacture and trade of recycled and remanufactured products, but not to remanufactured automobiles and their components and parts.

2 Normative References

The following documents are indispensable to the application of this document. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document.

GB/T 20861 Terminology of Waste Product Recovery

GB/T 23685 General Technical Specifications of Recovering for Waste Electrical and Electronic Equipment

3 Definitions

What is defined in GB/T 20861 and GB/T 23685, and the following terms and definitions are applicable to this document.

3.1 Remanufacturing

Remanufacturing refers to the manufacturing process of professionally repairing or upgrading and rebuilding waste products, so that their technical performance reaches or exceeds the level of new prototypes.

3.2 Remanufactured Products

Remanufactured products refer to products that are remanufactured from waste equipment or components and parts and comply with the requirements of relevant standards.

4 General Requirements

4.1 General Requirements for Recycled Products

4.1.1 The amount of recycled material used in recycled products shall not be lower than 50% (by mass).

4.1.2 The recycled products shall comply with the existing technical requirements for recycled products or adopt the corresponding new product inspection methods for inspection. They shall comply with the requirements of relevant standards from the perspectives of the safety, performance and environmental protection of new products.

NOTE: please refer to Table A.1 of Appendix A for relevant standards on the technical requirements for some recycled products.

4.2 General Requirements for Remanufactured Products

In accordance with the inspection methods of corresponding new products, the various indicators of the remanufactured products, such as: quality, safety, performance and environmental protection, shall not be lower than the requirements of the relevant standards of prototype products.

NOTE: please refer to Table A.2 of Appendix A for relevant standards on the technical requirements for some remanufactured products.

5 Labeling for Recycled and Remanufactured Products

5.1 Labeling for Recycled Products

5.1.1 Graphic style of labeling

The graphic style of labeling is shown in Figure 1. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Cited by

Similar standards

GB/T 32151.11-2026|GB/T 32151.4-2026|GB/T 32151.48-2026|GB/T 32151.49-2026|GB/T 32151.5-2026|GB/T 47095-2026

How to Download GB/T 27611-2011

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.