GB/T 27597-2011Dyestuffs - Determination of diffusibility (English PDF)
染料 扩散性能的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27597-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 5, 2011
Implementation date
March 1, 2012
Scope
GB/T 27597-2011 is the English-translated version of 染料 扩散性能的测定.
GB/T 27597-2011 is the Chinese standard "Dyestuffs - Determination of diffusibility". Its scope clause reads: This standard specifies the method for determination of dye diffusion properties.
This standard applies to disperse dyes, vat dye diffusion assay performance. Its clauses include reagents and materials.
Found what you need?
Document preview — GB/T 27597-2011
National Standard of the People's Republic of China
- ICS
- 71.100.01
- Classification
- G 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 5 Reagents and materials
- 6.1 Preparation of the dye suspension
1 Scope
This standard specifies the method for determination of dye diffusion properties.
This standard applies to disperse dyes, vat dye diffusion assay performance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1914-2007 Chemical analysis filter paper
General conditions GB/T 2374-2007 Determination of dyes provisions
GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD)
Principle 3
When the bleeding dye suspension formed a circle on the filter paper can be qualitatively determined according to dye diffusion properties of dye deposition infiltration center of the ring
The pros and cons. With the "dye diffusion performance rating card" in the loop filter permeability contrast dye diffusion to evaluate the performance rating.
4 instruments and equipment
Instruments and equipment shall comply with the relevant provisions of GB/T 2374-2007 in Chapter 4.
a) balance. a sense of not more than 0.001g.
b) Stirrer. magnetic stirrer, speed 500r/min ~ 600r/min, stirring rod specifications phi6mm × 40mm.
c) the surface of the dish. diameter 100mm.
d) scale straw. 0.2mL ~ 1.0mL.
5 Reagents and materials
Reagents and materials shall comply with the relevant provisions of GB/T 2374-2007 in Chapter 3; test water should comply with GB/T 6682-2008
The three water requirements.
a) filter paper. meet GB/T 1914-2007 rapid qualitative filter paper (101) of the filtration rate requirements.
Step 6 Analysis
6.1 Preparation of the dye suspension
Accurately weighed sample dye 0.5g (accurate to 0.001g), placed in 150mL beaker, add a small amount of distilled water of 30 °C, the dye
Tune into a paste, then add distilled water to make a total volume of 100mL. Keep the temperature of the suspension (30 ± 2) °C, the electromagnetic stirrer
500r/min ~ 600r/min speed of stirring 5min, alternate.
GB/T 27592-2023 | GB/T 24167-2022 | GB/T 24166-2021 | GB/T 27594-2025 | GB/T 27594-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 25803-2021C.I. Disperse violet 26 (Disperse violet HFRL)
- GB/T 25801-2020C.I. Disperse orange 30 (Disperse orange S-4RL)
- GB/T 25802-2017Disperse brilliant blue E-4R (C.I. Disperse blue 56)
- GB/T 10662-2016Disperse dark blue S-3BG 200% (C.I. Disperse blue 79)
- HG/T 3893-2014Disperse brilliant yellow E-4GL 200% (C.I. Disperse Yellow 211)
- HG/T 3896-2014Disperse red SE-6B 200% (C.I. Disperse Red 356)
Similar standards
How to Download GB/T 27597-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 27597-2011
$85.00