GB/T 26909-2011Guidelines for the conduct of tests for distinctness, uniformity and stability - Juglans (Juglans L.) (English PDF)
植物新品种特异性、一致性、稳定性测试指南 核桃属
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26909-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 19, 2011
Implementation date
December 1, 2011
Scope
GB/T 26909-2011 is the English-translated version of 植物新品种特异性、一致性、稳定性测试指南 核桃属.
GB/T 26909-2011 is the Chinese standard "Guidelines for the conduct of tests for distinctness, uniformity and stability - Juglans (Juglans L.)". Its scope clause reads: This standard specifies the Walnut Branch Walnut (JuglansL.)
New plant varieties for distinctness, uniformity and stability testing technical requirements. This standard applies to walnut case of a new plant variety testing.
Its clauses include terms, definitions and abbreviations; dus testing technical requirements.
Found what you need?
Document preview — GB/T 26909-2011
National Standard of the People's Republic of China
- ICS
- 65.020.20
- Classification
- B 05
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms, Definitions and Abbreviations
- 3.1 Terms and definitions
- 3.2 Abbreviations
- 4 DUS testing technical requirements
- 4.1 Test material
- 4.2 Test Method
- 5 distinctness, uniformity and stability evaluation
- 5.1 Specific
- 5.2 Consistency
- 5.3 Stability
- 6 varieties Heat
- 6.1 Variety description 3 packets
- 6.2 3 grouping feature
- 7 Characters and symbols related instructions
- 7.1 Characteristics of Type
- 7.2 Expression and status codes
- 7.3 Expression of Type
- 7.4 standard variety
- Annex B (informative) Technical questionnaire
- References
1 Scope
This standard specifies the Walnut Branch Walnut (JuglansL.) New plant varieties for distinctness, uniformity and stability testing technical requirements.
This standard applies to walnut case of a new plant variety testing.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
Determination of GB/T 5009.5-2010 protein in food
Determination of GB/T 5009.6-2003 fat foods
New GB/T 19557.1-2004 distinctness, uniformity and stability testing guidelines General
3 Terms, definitions and abbreviations
3.1 Terms and Definitions
Terms and definitions GB/T 19557.1-2004 established in applicable to this standard.
3.2 Acronyms
The following abbreviations apply to this standard.
QL --- QualitativeCharacteristics, quality characteristics;
QN --- QuantitativeCharacteristics, the number of features;
PQ --- Pseudo-qualitativeCharacteristics, pseudo-qualitative characteristics;
MG --- MeasurementforaGroupofPlants, for a group of plants or plant parts of a single measurement to obtain a single recording;
MS --- MeasurementforaNumberofSinglePlants, for a certain number of plants or plant parts were measured
Of the obtained plurality of records;
VG --- VisualObservationforaGroupofPlants, for a group of plants or parts of plants obtained single-per-visual
Records;
VS --- VisualObservationforaNumberofSinglePlants, for a certain number of plants or plant parts, respectively
Visual inspection to obtain a plurality of recording;
DUS --- Distinctness, UniformityandStability, distinctness, uniformity and stability.
4 DUS testing technical requirements
4.1 test material
4.1.1
Variety applicants in the time, place submission in line with the quantity and quality requirements of the test varieties of plant material. From the non-State Test
Material or regions submitted, the applicant should provide the customs, phytosanitary and other relevant documents in accordance with the relevant provisions of the local entry and exit and transportation.
4.1.2
The test material may be submitted scion or seedlings. When the test material as scion, the number of not less than 10 (each scion should have at least
3 full full of buds); seedlings as test materials, the number of not less than six (height 0.8m ~ 1.0m, base diameter 1.0cm above).
GB/T 19630.3-2011 | GB/T 19630.4-2011 | NY/T 1420-2007 | GB/T 17315-2026 | GB/T 26911-2011 | GB/T 26910-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26909-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26909-2011
$295.00