GB/T 26681-2011Technical requirements and methods of measurement for standard testing transmitter of digital terrestrial television (English PDF)
地面数字电视标准测试发射机技术要求和测量方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26681-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 16, 2011
Implementation date
November 1, 2011
Scope
GB/T 26681-2011 is the English-translated version of 地面数字电视标准测试发射机技术要求和测量方法.
GB/T 26681-2011 is the Chinese standard "Technical requirements and methods of measurement for standard testing transmitter of digital terrestrial television".
Its scope clause reads: This standard specifies the line with GB 20600-2006 standard for terrestrial digital TV test transmitter (hereinafter referred to as the test transmitter) skills Surgery and methods of measurement.
This standard applies to GB 20600-2006 standard for terrestrial digital TV test transmitter, NA terrestrial digital TV broadcasting transmitter. Its clauses include terms and definitions, abbreviations.
Found what you need?
Document preview — GB/T 26681-2011
National Standard of the People's Republic of China
- ICS
- 17.220
- Classification
- L 85
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions, abbreviations
- 3.1 Terms and definitions
- 3.2 Abbreviations
- 4 2 Technical Requirements
- 4.1 General Requirements
- 4.2 Performance Requirements
- 5 Test Method
- 5.1 Test Conditions
- 5.2 measuring device
- 5.3 Working Mode
- 5.4 Frequency adjustment step
- 5.6 center frequency accuracy
- 5.7 harmonic oscillator and clutter
- 5.8 oscillator phase noise
- 5.9 Shoulder
- 5.10 band spectrum unevenness
- 5.11 9 modulation error rate
- 5.13 output power accuracy
- 5.14 output load impedance voltage standing wave ratio
- Appendix A (normative) terrestrial digital television broadcasting system maximum net rate
- Appendix B (normative) Table of Frequency Allocations 13 TV channels
1 Scope
This standard specifies the line with GB 20600-2006 standard for terrestrial digital TV test transmitter (hereinafter referred to as the test transmitter) skills
Surgery and methods of measurement.
This standard applies to GB 20600-2006 standard for terrestrial digital TV test transmitter, NA terrestrial digital TV broadcasting transmitter.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 11313.2-2007 RF connectors - Part 2. RF coaxial connectors 9.52 specification (IEC 61169-2.
2001, IDT)
GB/T 11313.4-2007 RF connectors - Part 4. inner diameter of outer conductor 16mm (0.63in), characteristic impedance
50ohm, threaded connection RF coaxial connectors (7-16) (IEC 60169-4. 1975, NEQ)
GB/T 17975.1-2000 Information technology - Generic coding of moving pictures and associated audio information - Part 1. System (ISO /
IEC 13818-1.2007, MOD)
GB 20600-2006 digital television terrestrial broadcasting system frame structure, channel coding and modulation
GB/T 26682-2011 standard terrestrial digital TV test receiver technical requirements and methods of measurement
SJ/T 11324-2006 digital television receivers term
SJ/T 11328-2006 digital television receiving equipment interface specification - Part 2. Transport Stream Interface
3 Terms and definitions, abbreviations
3.1 Terms and Definitions
SJ/T 11324-2006 define the following terms and definitions apply to this document.
3.1.1 Shoulder
From the center frequency of a predetermined value of the average power band frequencies relative to the amount of change in center frequency, in decibels (dB).
3.1.2 Mode operationmode
In line with GB 20600-2006 predetermined combination of different parameters, including the number of carriers, forward error correction code rate, symbol constellation mapping mode, frame
Head and symbol interleaving mode options.
3.1.3 Modulation error rate
Modulated signal ideal symbol vector magnitude squared and squared symbol error vector magnitude and the ratio in decibels (dB).
GB/T 25068.1-2020 | GB/T 25070-2019 | GB/T 13166-2018 | GB/T 48109-2026 | GB/T 24468-2025 | GB/T 26682-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26681-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26681-2011
$225.00