GB/T 26476-2021Mechanical parking system—Vocabulary (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules of Standardization Documents" drafted.

This document replaces GB/T 26476-2011 "Mechanical Parking Equipment Terminology". Compared with GB/T 26476-2011, except for structural adjustment In addition to the adjustment and editorial changes, the main technical changes are as follows:

--- Amend "Main categories of mechanical parking equipment" in Chapter 1 "Scope" to "Classification and Types of Mechanical Parking Equipment" (see Section 1 Chapter, Chapter 1 of the:2011 edition);

--- Added 26 terms (see 3.1.1, 3.2.1.4, 3.3.7~3.3.9, 3.3.14~3.3.19, 3.3.30, 3.6.8, 3.6.19, 3.6.20, 3.7.2, 3.8.10, 3.8.15~3.8.17, 3.9.1, 3.9.8~3.9.12); 5 terms were deleted (see 6.6, 6.17,:2011 edition 6.20, 8.20, 8.21);

---Improved the definitions of nine categories of mechanical parking equipment terms (see 3.1.2~3.1.10, 2.1.1~2011 edition) 2.1.9);

--- Modified the terms "simple lift mechanical parking equipment", "rearrangement mechanical parking equipment", "turntable", "forced drive" and The English equivalent of "gauge" (see 3.1.3, 3.2.1.3, 3.3.21, 3.5.1 and 3.8.11, 2.1.2, 2.2.3, 3.12,:2011 edition, 5.1 and 8.8);

---Improve the mechanical parking facilities according to the arrangement of parking spaces, the location of entrances and exits, and the relationship between people and mechanical parking equipment.

Definitions of terms for alternate versions (see 3.2.1, 3.2.2 and 3.2.3, 2.2, 2.3 and 2.4 of the:2011 edition);

--- Modified the definitions of the terms "transverse mechanism" and "vertical mechanism" (see 3.3.2 and 3.3.3, 3.3 and 3.2 of the:2011 edition);

--- Modified the definition of the term "lifter" (see 3.3.10, 3.8 of the:2011 edition); modified the term "lifting carrier" as "lifting flat platform" and its definition (see 3.3.11, 3.9 of the:2011 edition), and the definition of the term "carrier" (see 3.3.12,:2011)

3.7 of the annual edition), the terms changed from this are "lifting mechanism", "access transfer mechanism", "fall prevention device", "safety gear", "limited "speeder", "buffer", "no load", "rated load", "floor" and "leveling" (see 3.3.1, 3.3.6, 3.4.1, 3.4.3, 3.4.4, 3.4.7, 3.8.22, 3.8.23, 3.9.4, 3.9.5, 3.1, 3.6, 4.1, 4.3, 4.4, 4.7, 8.16, 8.17, 9.3 and 3.20 of the:2011 edition);

--- Modify the term "railway stacker" to "roadway stacker", and at the same time modify the "crane" in its definition to "device", and complete Good terms (see 3.3.20, 3.10 of the:2011 edition);

--- Improve the definition of the term "turntable", delete "in mechanical parking equipment" and "certain angle", add "independent" mechanical device (see 3.3.21, 3.12 of the:2011 edition);

--- Modify the terms "track" and "guide" to "running track", "lifting guide" and "running guide", and redefine (see 3.3.24, 3.3.25 and 3.3.26, 3.16 and 3.15 of the:2011 edition);

--- Modify the "balance" in the definition of the term "counterweight" to "maintain the traction capacity" (see 3.3.28, 3.18 of the:2011 edition);

--- Modify the term "in and out of storage platform" to "in and out of storage platform", the definition remains unchanged (see 3.3.29, 3.19 of the:2011 edition);

--- Improve the specific role of the term "speed limiter" action (see 3.4.4, 4.4 of the:2011 edition);

--- Improve the definition of the term "vehicle blocking device" (see 3.4.5, 4.5 of the:2011 edition);

--- Modify the definition of the term "person and vehicle mistakenly entering detection device" to avoid ambiguity (see 3.4.6, 4.6 of the:2011 edition);

--- Revised the attribution of the term "warning device" and its definition (see 3.4.9, 9.6 of the:2011 edition);

--- Add "toothed belt, screw" in the definition of the term "forced drive", delete the description of "suspended" (see 3.5.1, 5.1 of the:2011 edition);

--- Improve the definition of the term "traction drive" (see 3.5.2, 5.2 of the:2011 edition);

--- Modify the definition of the term "safe exit" (see 3.6.5, 6.5 of the:2011 edition);

--- Modify the term "gate" to be "entry and exit door", and correspondingly modify the "gate" in the definition of "passage door" to be "entry and exit door" (see 3.6.6, 3.6.11, 6.7, 6.11 of the:2011 edition);

--- Modify the "power" in the definition of the term "automatic door" to "under the control of the mechanical parking equipment control system" (see 3.6.12,:2011 6.12 of the year edition);

--- Delete the required description in the definition of the term "workspace" (see 6.19 of the:2011 edition);

--- Improve the definition of the term "pit" and add "or the space below the ground" (see 3.6.21, 6.21 of the:2011 edition);

--- Modify the term "parking garage" in the definition of "suitable car size" to "mechanical parking equipment", and improve the definition of "maximum external dimensions". Description (see 3.8.5, 8.5 of the:2011 edition);

--- Modified the attribution of the terms "parking space height" and "parking space width" (see 3.8.7, 3.8.8, 7.4, 7.5 of the:2011 edition), and revised Change the definition of "parking space width";

--- Revised the definition of the term "gauge" (see 3.8.11, 8.8 of the:2011 edition);

--- Modify the term "wheelbase" to "carrier wheelbase" and modify its definition (see 3.8.12, 8.9 of the:2011 edition);

--- Modified the definition of the term "rated speed", not specifically the carrier, modified to "mechanism or component" (see 3.8.13,:2011 edition of 8.10);

--- Modify the terms "wellway width" and "wellway depth" to "wellway clear width" and "wellway clear depth", and modify the definitions accordingly (see 3.8.18 and 3.8.19, 8.12 and 8.13 of the:2011 version);

--- Improve the definition of the term "leveling accuracy" (see 3.8.20, 8.14 of the:2011 edition);

--- Revised the definition of the term "full load" (see 3.8.24, 8.18 of the:2011 edition);

--- Revised the definition of the term "computer room" (see 3.9.3, 9.2 of the:2011 edition);

--- Modified the attribution of the term "leveling" (see 3.9.5, 3.20 of the:2011 edition);

--- Modify the term "power supply equipment" to "power supply" (see 3.9.7, 9.5 of the:2011 edition);

--- In the definition of the term "peripheral equipment", delete "parking fee management system" (see 3.9.13, 9.7 of the:2011 edition).

1 Scope

This document defines the classification, types, mechanisms and components of mechanical parking equipment, safety guards, drives, access and areas, parking spaces, Terms and definitions for parameters, etc.

This document is applicable to lifting and traversing, simple lifting, plane moving, roadway stacking, vertical lifting, vertical circulation, horizontal circulation There are 9 types of mechanical parking equipment including ring type, multi-layer circulation type and special car lift.

2 Normative references

There are no normative references in this document.

3 Terms and Definitions