GB/T 25841-2017Guide of protection relaying for 1000kV power system (English PDF)
1000kV电力系统继电保护技术导则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25841-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 25841-2017 is the English-translated version of 1000kV电力系统继电保护技术导则.
GB/T 25841-2017 is the Chinese standard "Guide of protection relaying for 1 000 kV power system". Its scope clause reads: This standard specifies the exchange 1000kV substation and 1000kV substation voltage level has special requirements of the relay protection device the basic guidelines.
This standard applies to 1000kV power system relay protection research, design, manufacture, testing, construction and operation and other fields.
Its clauses include general requirements; line protection technology requirements; transformer protection technical requirements; bus protection; circuit breaker protection and reclosing; remote tripping and over-voltage protection; shunt reactor protection; short lead protection.
Found what you need?
Document preview — GB/T 25841-2017
National Standard of the People's Republic of China
- ICS
- 29.240
- Classification
- K 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 General requirements
- 4 line protection technology requirements
- 5 Transformer Protection Technical Requirements
- 6 bus protection
- 7 circuit breaker protection and reclosing
- 8 remote tripping and over-voltage protection
- Shunt reactor protection
- Short lead protection
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is GB /Z 25841-2010 "1000kV Power System Relay Protection Technical Guidelines" revision, and GB /Z 25841-2010, in addition to editorial changes, the main technical changes are as follows.
--- Increasing the other voltage level 1000kV substation relay protection of the special requirements;
--- Communication Protocol to delete DL/T 667 requirements, leaving only to meet the requirements of DL/T 860;
--- Cancel the central signal contact output requirements;
--- 1000kV does not consider the smart station, delete the requirements of electronic transformers;
--- For the main line protection, instead of using only the current differential protection, and cancel the corresponding longitudinal distance protection requirements;
--- Line protection added to determine the zero sequence compensation factor requirements;
--- Line protection of non-full phase oscillation and failure occurred outside the assessment;
--- The main transformer, voltage regulator, compensation requirements change prepared separately;
--- Increase the on-load tap-changer protection requirements;
--- Increase 110kV busbar protection and capacitor protection action and start failure requirements;
--- Canceled in accordance with the order of reclosing requirements.
1 Scope
This standard specifies the exchange 1000kV substation and 1000kV substation voltage level has special requirements of the relay protection device The basic guidelines.
This standard applies to 1000kV power system relay protection research, design, manufacture, testing, construction and operation and other fields.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 14285 relay protection and safety automatic device technical regulations
GB/T 14598.9 Electrical relays Part 22-3. Measuring relays and protection devices electrical disturbance test Radiated Electromagnetic Field interference test
GB/T 14598.10 Electrical relays - Part 22: Measuring relays and protection equipment - Part 22-4 - Electrical disturbance tests Fast transient interference test
GB/T 14598.11 Measuring relays and protection equipment Part 11: Auxiliary power supply port voltage dips, short interruptions, changes And ripple
GB/T 14598.13 Measuring relays and protection equipment - Part 22-1. Electrical disturbance tests 1MHz burst interference test
GB/T 14598.14 Measuring relays and protection equipment - Part 22-2. Electrical disturbance tests Electrostatic discharge test
GB/T 14598.16 Electrical relays - Part 25: Electromagnetic emission test of measuring relays and protection devices
GB/T 14598.17 Electrical relays - Part 22-6 - Electrical disturbance tests for measuring relays and protection equipment - RF field sensing The immunity to conducted disturbances
GB/T 14598.18 Measuring relays and protection devices - Part 22-5 - Electrical disturbance tests Surge immunity test
GB/T 15145 transmission line protection devices for general technical conditions
GB/T 17626.8 Electromagnetic compatibility test and measurement techniques Power frequency magnetic field immunity test
GB/T 17626.9 Electromagnetic compatibility test and measurement techniques pulsed magnetic field immunity test
GB/T 17626.29 electromagnetic compatibility test and measurement technology DC power input port voltage dips, short interruptions and voltage changes Immunity test
GB/T 20840.2 Transformers - Part 2: Current transformers
GB/T 22386 Power system transient data exchange common format
DL/T 364 General technical requirements for Fiber Channel transmission protection information
DL/T 478 General technical requirements for relay protection and safety automatic devices
DL/T 670 General specification of busbar protection device
DL/T 720 power system relay cabinets, screens general technical conditions
DL/T 770 General Requirements for Transformer Protective Devices
DL/T 860 (all parts) Substation communication networks and systems
DL/T 866 Current Transformer and Voltage Transformer Selection and Calculation Guide
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 14285Technical code for relaying protection and security automatic equipment
- GB/T 14598.9Measuring relays and protection equipment -- Part 22-3: Electrical disturbance tests -- Radiated electromagnetic field immunity
- GB/T 14598.10Measuring relays and protection equipment -- Part 22-4: Electrical disturbance tests -- Electrical fast transient/burst immunity test
- GB/T 14598.11Measuring relays and protection equipment -- Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port
- GB/T 14598.13Electrical relays -- Part 22-1: Electrical disturbance tests for measuring relays and protection equipment. 1 MHz burst immunity tests
- GB/T 14598.14Measuring relays and protection equipment -- Part 22-2: Electrical disturbance tests -- Electrostatic discharge tests
GB/T 14598.16 · GB/T 14598.17 · GB/T 20840.2 · GB/T 22386 · DL/T 478 · DL/T 720 · DL/T 770 · DL/T 860
Similar standards
How to Download GB/T 25841-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL/T 364-2019 — General specification of transmitting protection information on optical channel
DL/T 670-2010 — General specification for busbar protection equipment
DL/T 860.10-2018 — Communication networks and systems for power utility automation -Part 10: Conformance testing
Secure payment via Stripe
Payments accepted
GB/T 25841-2017
$235.00