Valid

GB/T 25729-2010Grain and oil machinery - Impact delecher (English PDF)

粮油机械 撞击松粉机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 25729-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 23, 2010

Implementation date

March 1, 2011

Scope

GB/T 25729-2010 is the English-translated version of 粮油机械 撞击松粉机.

GB/T 25729-2010 is the Chinese standard "Grain and oil machinery - Impact delecher".

Its scope clause reads: This standard specifies the impact of loose powder machine-related terms and definitions, working principle, model and basic parameters, technical requirements, test methods, inspection Inspection rules and signs, packaging, transportation and storage requirements.

This standard applies to the processing of loose flour, crushed flakes hit with loose powder. Its clauses include terms and definitions; works; models and basic parameters.

Found what you need?

Document preview — GB/T 25729-2010

National Standard of the People's Republic of China

ICS
67.260
Classification
X 91

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 works
  • 5 models and basic parameters

1 Scope

This standard specifies the impact of loose powder machine-related terms and definitions, working principle, model and basic parameters, technical requirements, test methods, inspection

Inspection rules and signs, packaging, transportation and storage requirements.

This standard applies to the processing of loose flour, crushed flakes hit with loose powder.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 191 Packaging - Pictorial signs

GB/T 3768 Determination of sound pressure of sound power levels of noise sources using an enveloping surface reflectance measuring surface Simple Method

GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements

GB/T 9239.1 Mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. Specification and balancing of poor test

GB/T 13306 signs

GB/T 24854 grain and oil machinery products packaging technology

GB/T 24855 General technical requirements grain machinery assembly

GB/T 24857 Oil Machinery plates, steel plate member General technical conditions

GB/T 25218 Grain and Oil Painting machinery products general technical conditions

GB Z158 workplace occupational hazard warning labels

3 Terms and Definitions

The following terms and definitions apply to this standard.

3.1 Containing powder material into the machine rate rateofflourtoenter

Powder material into the machine contained in the mass fraction.

3.2 The machine materials containing powder rate rateofflourtogoout

Machine materials contained in the powder mass fraction.

3.3 Take powder rate incrementofrateofflour

After the loose powder material powder containing the rate of increase of the mass fraction.

4 works

The material into the machine under the influence of high-speed rotating disc thrown, a tremendous centrifugal force and shoot around the column, hit percussive friction ring so

Loose flakes, crushed.

5 models and basic parameters

5.1 Model Methodology

Executed in accordance with Appendix A.

GB 16798-2023 | GB/T 25232-2010 | GB 22747-2008 | GB/T 25730-2025 | GB/T 25728-2024 | GB/T 25727-2010 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 25729-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 25729-2010

$125.00