GB/T 25406-2010Series small-sized light sprinkling irrigation machines (English PDF)

1 Scope

This standard specifies the type of light-small sprinkling machine, models, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to matching power 22kW or less light and small irrigation machine (hereinafter referred to as sprinkler).

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)

GB 755 rotary motor fixed and performance (GB 755-2008, IEC 60034-1.2004, IDT)

GB/T 1032 Test Methods for Three-phase asynchronous motor

GB 1971 rotary motor Terminal markings and direction of rotation (GB 1971-2006, IEC 60034-8.2002, IDT)

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1.1999, IDT)

Determination of GB/T 3214 water pump flow

GB/T 3216-2005 rotary power pump hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906.1999, MOD)

GB 5084 irrigation water quality standards

GB/T 6072.1-2008 Reciprocating internal combustion engines - Part 1. Power, calibration and testing of fuel and lubricating oil consumptions

Additional requirements for engines for general method (ISO 3046-1.2002, IDT)

GB 10395.8 Tractors and machinery for agriculture and forestry - Safety requirements - Part 8 Irrigation pumps and crew

GB 10396 agricultural and forestry tractors and machinery, lawn and garden equipment - Safety signs and hazard pictorials - General principles (GB 10396-

2006, ISO 11684.1995, MOD)

GB/T 13306 signs

GB/T 13384 mechanical and electrical products packaging General technical conditions

JB/T 5673 agricultural and forestry tractors and machinery paint general technical conditions

JB/T 6663 Small-sized single-stage centrifugal pump

JB/T 6664.1 priming pump - Part 1. Types and basic parameters

JB/T 6664.3 priming pump - Part 3. Performance test methods for self-priming

ISO 15886-3 Agricultural irrigation equipment Sprinklers - Part 3. water distribution characteristics and test methods

3 type, model

Type 3.1