GB/T 25217.1-2010Methods for test, monitoring and prevention of rock burst - Part 1: Classification and laboratory test method on bursting liability of roof strata (English PDF)
冲击地压测定、监测与防治方法 第1部分：顶板岩层冲击倾向性分类及指数的测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25217.1-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 26, 2010
Implementation date
February 1, 2011
Scope
GB/T 25217.1-2010 is the English-translated version of 冲击地压测定、监测与防治方法 第1部分：顶板岩层冲击倾向性分类及指数的测定方法.
GB/T 25217.1-2010 is the Chinese standard "Methods for test, monitoring and prevention of rock burst - Part 1: Classification and laboratory test method on bursting liability of roof strata".
Its scope clause reads: This section GB/T 25217 specifies the impact of coal seam roof strata classification and terminology and definitions tendency index determination involved top Shock rock and plate orientation classification index, equipment, specimen size, quantity and water content measurement and data processing steps and roof strata Analyzing the impact of bias.
This section applies to coal seam roof strata classification and the impact orientation under laboratory conditions, the standard can be processed specimens seam roof Determination of rock pressure bump tendency index.
Its clauses include terms and definitions; roof strata and impact orientation classification index.
Found what you need?
Document preview — GB/T 25217.1-2010
National Standard of the People's Republic of China
- ICS
- 73.010
- Classification
- D 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 roof strata and impact orientation classification index
1 Scope
This section GB/T 25217 specifies the impact of coal seam roof strata classification and terminology and definitions tendency index determination involved top
Shock rock and plate orientation classification index, equipment, specimen size, quantity and water content measurement and data processing steps and roof strata
Analyzing the impact of bias.
This section applies to coal seam roof strata classification and the impact orientation under laboratory conditions, the standard can be processed specimens seam roof
Determination of rock pressure bump tendency index.
2 Normative references
The following documents contain provisions which, through reference GB/T 25217 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 23561.1-2009 physical and mechanical properties of coal and rock measuring method - Part 1. General requirements Sampling
GB/T 23561.3-2009 physical and mechanical properties of coal and rock measuring method - Part 3. coal and rock bulk density determination
GB/T 23561.8-2009 physical and mechanical properties of coal and rock measuring method - Part 8. Determination of coal and rock deformation parameters
GB/T 23561.10-2010 physical and mechanical properties of coal and rock measurement method Part 10. Determination of tensile strength of coal and rock method
3 Terms and Definitions
The following terms and definitions apply to this part of the GB/T 25217 of.
3.1 Shock rock tendency burstingliabilityofrockstratum
Rock accumulate deformation energy and having an impact on the nature of the damage.
Note 1. Overrides GB/T 16414-2008, definitions 4.13.
3.2 Bending energy index
In uniform load per unit width of the deformation of rock beam reaches the limit when energy savings span.
4 roof strata and impact orientation classification index
Roof strata tendency classified for impact bending energy index value size divided into three categories (Table 1).
Table 1 roof strata and impact orientation classification index
Class I Class II Class III class
No impact Weak Strong tendency
Bending energy index/kJ UWQS<=15 15 \u003cUWQS<=120 UWQS\u003e 120
SN/T 1537-2023 | GB/T 2007.1-1987 | GB/T 2007.6-1987 | GB/T 25217.8-2021 | GB/T 25217.9-2020 | GB/T 25217.3-2019 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 25217.1-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 25217.10-2019 — Methods for test, monitoring and prevention of rock burst—Part 10: Prevention method of drillhole destressing on coal-seam
GB/T 25217.11-2019 — Methods for test, monitoring and prevention of rock burst—Part 11: Prevention method of destress blasting in coal seam
GB/T 25217.12-2019 — Methods for test, monitoring and prevention of rock burst—Part 12: Prevention method of protective seam mining
Secure payment via Stripe
Payments accepted
GB/T 25217.1-2010
$85.00