GB/T 24736.4-2009Management guide for tooling design - Part 4: Proof rule for tooling (English PDF)
工艺装备设计管理导则 第4部分：工艺装备验证规则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24736.4-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 30, 2009
Implementation date
September 1, 2010
Scope
GB/T 24736.4-2009 is the English-translated version of 工艺装备设计管理导则 第4部分：工艺装备验证规则.
GB/T 24736.4-2009 is the Chinese standard "Management guide for tooling design - Part 4: Proof rule for tooling". Its scope clause reads: This section GB/T 24736 specifies the mechanical manufacturing technology and equipment (tooling) to verify the scope, basis, categories, content and procedures.
This section applies to verify the mechanical manufacturing processes and equipment. Its clauses include tooling verification purposes; tooling authentication realm; tooling verification basis; tooling verification category.
Found what you need?
Document preview — GB/T 24736.4-2009
National Standard of the People's Republic of China
- ICS
- 25.060.20
- Classification
- J 40
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 tooling verification purposes
- 3 Tooling authentication realm
- 4 tooling verification basis
- 5 tooling verification category
1 Scope
This section GB/T 24736 specifies the mechanical manufacturing technology and equipment (tooling) to verify the scope, basis, categories, content and procedures.
This section applies to verify the mechanical manufacturing processes and equipment.
2 tooling verification purposes
2.1
is manufactured to ensure products meet the quality requirements of the design.
2.2
ensure tooling technology to meet code requirements.
2.3
verify the reliability of the tooling, rationality and security to ensure the smooth progress of production.
3 Tooling authentication realm
Where the following circumstances need to be verified.
--- For the first time the design and manufacture of tooling;
--- Major revisions design tooling;
--- Copy of large, complex, precision tooling.
4 tooling verification basis
Tooling verification based on generally includes.
--- Products, parts design and technical requirements;
--- Process planning;
--- Tooling design task book, tooling design, tooling manufacturing process, general technical conditions and tooling instructions.
5 tooling verification category
5.1 divided by space
fixed site verification and on-site verification.
5.1.1
Fixed site verification is defined as design and technological procedures required to prepare the product components in advance, and then simulated in a fixed device verification. Generally applicable to all kinds of mold validation. Fixed site verification in tooling manufacturing sector.
5.1.2
field-proven means of tooling using field test processing. Site verification must be carried out using tooling workshop. Site verification
Divided into two cases.
--- Parts by product design and process procedures required in advance to test processing;
--- Tooling validation and verification processes simultaneously.
5.2 points according to the degree of tooling complexity
Key verification, validation and general simple authentication.
5.2.1
Key verification verification for large, complex, precision tooling and critical tooling. Key verification tooling proven that after passing satisfied
The procedures and processes related to process documents.
5.2.2
General verification for the general complexity of the tooling. Verification of general tooling tooling can be verified prior to inclusion processes and procedures related to
Process documents.
5.2.3 Simple Authentication for simple tooling
General product parts can not be independently verified as kind, through the production of the first pieces
Checks and other methods of simple authentication.
GB/T 28253-2025 | JB/T 3943-2017 | GB/T 33524.2-2017 | GB/T 24736.3-2009 | GB/T 24736.2-2009 | GB/T 24736.1-2009 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 24736.4-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 24736.3-2009 — Management guide for tooling design - Part 3: Procedure for tooling design
GB/T 24736.2-2009 — Management guide for tooling design - Part 2: Selection rule of tooling design
GB/T 24736.1-2009 — Management guide for tooling design - Part 1: Vocabulary
Secure payment via Stripe
Payments accepted
GB/T 24736.4-2009
$135.00