GB/T 24736.2-2009Management guide for tooling design - Part 2: Selection rule of tooling design (English PDF)
工艺装备设计管理导则 第2部分：工艺装备设计选择规则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24736.2-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 30, 2009
Implementation date
September 1, 2010
Scope
GB/T 24736.2-2009 is the English-translated version of 工艺装备设计管理导则 第2部分：工艺装备设计选择规则.
GB/T 24736.2-2009 is the Chinese standard "Management guide for tooling design - Part 2: Selection rule of tooling design". Its scope clause reads: This section GB/T 24736 specifies the general rules for selection of process equipment design, selection process, economic evaluation methods.
This section applies to machinery manufacturing technology and equipment (tooling) design choices. Its clauses include tooling design selection rule; tooling design selection procedure.
Found what you need?
Document preview — GB/T 24736.2-2009
National Standard of the People's Republic of China
- ICS
- 25.060.20
- Classification
- J 40
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 tooling design selection rule
- 4 tooling design selection procedure
1 Scope
This section GB/T 24736 specifies the general rules for selection of process equipment design, selection process, economic evaluation methods.
This section applies to machinery manufacturing technology and equipment (tooling) design choices.
2 Normative references
The following documents contain provisions which, through reference GB/T 24736 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 24740-2009 Technical product documentation machining positioning, clamping notation
3 tooling design selection rule
3.1
tooling design choices based on
Usually based tooling design choices include.
--- Production program, production types and forms of production organization;
--- Degree of common products and product life cycle;
Features --- technology programs;
--- Tooling environment;
--- The possibility of division of labor specialization;
--- Extent using standard tooling;
--- Load balanced situation existing equipment;
--- Group technology applications;
--- Safety requirements;
---Production cycle.
Selection principle 3.2 tooling design
Tooling design choices should follow the following principles.
--- Improve product quality and production efficiency;
--- Resource conservation, energy conservation;
--- Reduced tooling manufacturing costs and maintenance costs;
--- Improve tooling versatility;
--- Try using standard tooling;
--- Good removable and easy recyclability.
4 tooling design selection procedure
4.1 Investigation and Analysis
Conduct research and analysis of the contents are.
GB/T 23901.4-2019 | GB/T 23901.5-2019 | GB/T 23906-2009 | GB/T 24734.10-2009 | GB/T 24736.4-2009 | GB/T 24736.3-2009 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 24736.2-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 24736.3-2009 — Management guide for tooling design - Part 3: Procedure for tooling design
GB/T 24736.1-2009 — Management guide for tooling design - Part 1: Vocabulary
GB/T 24736.4-2009 — Management guide for tooling design - Part 4: Proof rule for tooling
Secure payment via Stripe
Payments accepted
GB/T 24736.2-2009
$205.00