GB/T 24736.3-2009Management guide for tooling design - Part 3: Procedure for tooling design (English PDF)

3.1

tooling design must meet the technical requirements, structural performance, reliable, safe, easy to operate, is conducive to high-quality, high efficiency, low consumption, ring

Paul, improve working conditions, improve tooling standardization, universal, serialized level.

3.2

tooling design should consider the use of a combination of design and the introduction of environmental factors.

3.3 tooling design to in-depth on-site, with practice

Major, determining the critical tooling design, should be widely consulted, and by program

It can be carried out after the design review approval.

3.4

tooling design drawings must ensure that clear, complete and accurate, uniform.

3.5

pairs of sophisticated, major, special tooling shall be accompanied by the use of the specification and design calculations.

4.1 research, analyzes tooling design plan

Research, analyzes tooling design task book, and its proposed amendments.

4.2

are familiar pattern workpiece

4.2.1

familiar with the product to be processed in the role of being the structural characteristics of the workpiece, the main accuracy and technical conditions.

4.2.2

familiar with the workpiece material, rough type, quality and dimensions and so on.

4.3

are familiar with process scheme workpiece, process planning

4.3.1

is familiar with the process route workpiece.

4.3.2

are familiar with thermal treatment of the workpiece.

4.3.3

familiar with the process equipment models, specifications, the main parameters and status intact.

4.5 survey, test

Inside and outside the enterprise to collect information and make the necessary technological experiments; and to seek the views of the person concerned, according to the research needs of the organization.

GB/T 28253-2025 | JB/T 3943-2017 | GB/T 33524.2-2017 | GB/T 24736.4-2009 | GB/T 24736.2-2009 | GB/T 24736.1-2009 | […]