GB/T 24715-2009Oxygen supply convertor (English PDF)

1 Scope

This standard specifies the airborne molecular sieve oxygen oxygen system (hereinafter referred to as converters) terms and definitions with a source of oxygen converter, requirements, testing

Methods, inspection rules, marking, packaging, transportation and storage requirements.

This standard applies to airborne molecular sieve oxygen oxygen converter systems design, manufacture and acceptance.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 191-2008 Packaging - Pictorial signs (ISO 780.1997, MOD)

GJB145A-1993 Protective Packaging

GJB150.1-1986 military equipment Environmental test methods - General

GJB150.3-1986 Environmental test methods for military equipments High temperature test

GJB150.4-1986 Environmental test methods for military equipments Low temperature test

GJB150.6-1986 Environmental test methods for military equipments Temperature - highly experimental

Environmental test methods for military equipments GJB150.9-1986 damp heat test

GJB150.10-1986 Environmental test methods for military equipments mold test

GJB150.11-1986 Environmental test methods for military equipments salt spray test

GJB150.15-1986 Environmental test methods for military equipments acceleration test

GJB150.16-1986 Environmental test methods for military equipments Vibration test

Environmental test methods for military equipments GJB150.18-1986 impact test

GJB151A-1997 military equipment and subsystems electromagnetic emission and susceptibility requirements

GJB152A-1997 military equipment and subsystems electromagnetic emission and susceptibility measurements

GJB181A-2003-powered aircraft characteristics

GJB360A-1996 test methods for electronic and electrical component

GJB/Z594A-2000 chemical metal plating layer and cover layer thickness Series selection principle

GJB599 environment resistant quick separation of high-density small circular electrical connectors total specification

HB0-44-2008 aviation body oxygen and protective life-saving equipment product type designation

HB6-67-2003 aviation instrumentation trademark

HB5028 aeronautical products auxiliary dry air storage

HB5870 Air Transport Auxiliary products packaging General technical conditions

HB5888-2008 aviation auxiliary products with fonts and symbols

3 Terms and Definitions

The following terms and definitions apply to this standard.