GB/T 24714-2009Oxygen concentrator (English PDF)
氧气浓缩器
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24714-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 30, 2009
Implementation date
July 1, 2010
Scope
GB/T 24714-2009 is the English-translated version of 氧气浓缩器.
GB/T 24714-2009 is the Chinese standard "Oxygen concentrator". Its scope clause reads: This standard specifies the onboard oxygen system with oxygen molecular sieve oxygen concentrator terms and definitions, requirements, test methods, inspection rules, marking Chi, packaging, transportation and storage requirements.
This standard applies to the onboard oxygen system with oxygen molecular sieve oxygen concentrator design, manufacture and acceptance. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 24714-2009
National Standard of the People's Republic of China
- ICS
- 49.080
- Classification
- V 44
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 requires
- 4.1 General Requirements
- 4.2 Performance
- 4.3 Environmental Adaptability
- 4.4 Reliability
- 4.5 Maintainability
- 4.7 Security
- 4.8 physiological hygiene requirements
- 4.9 material
- 4.10 Component
- 4.11 Wire and Cable
- 4.12 printed circuit board
- 4.13 The electrical connector
- 4.14 Software
- 4.15 gas lines and electrical connections crosslinked
- 4.16 input conditions require
- 4.17 Design Guidelines
- 4.18 5 installed on the machine
- 5.1 Test conditions
- 5.2 Test item
- 6 Inspection Rules
- 6.1 Inspection classification
- 6.2 Identification Test
- 6.3 Quality conformance inspection
- 7 Category
- 8 signs, packaging and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Storage
- 8.4 12 random file
1 Scope
This standard specifies the onboard oxygen system with oxygen molecular sieve oxygen concentrator terms and definitions, requirements, test methods, inspection rules, marking
Chi, packaging, transportation and storage requirements.
This standard applies to the onboard oxygen system with oxygen molecular sieve oxygen concentrator design, manufacture and acceptance.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191-2008 Packaging - Pictorial signs (ISO 780.1997, MOD)
GJB33 total semiconductor device specification
GJB145A-1993 Protective Packaging
GJB150.1-1986 military equipment Environmental test methods - General
GJB150.3-1986 Environmental test methods for military equipments High temperature test
GJB150.4-1986 Environmental test methods for military equipments Low temperature test
GJB150.6-1986 Environmental test methods for military equipments Temperature - highly experimental
Environmental test methods for military equipments GJB150.9-1986 damp heat test
GJB150.10-1986 Environmental test methods for military equipments mold test
GJB150.11-1986 Environmental test methods for military equipments salt spray test
GJB150.15-1986 Environmental test methods for military equipments acceleration test
GJB150.16-1986 Environmental test methods for military equipments Vibration test
Environmental test methods for military equipments GJB150.18-1986 impact test
GJB151A-1997 military equipment and subsystems electromagnetic emission and susceptibility requirements
GJB152A-1997 military equipment and subsystems electromagnetic emission and susceptibility measurements
GJB181A-2003-powered aircraft characteristics
GJB228 silicone rubber products
GJB362A-1996 Rigid PCB General specification
GJB/Z457-2006 General specification for airborne electronic equipment
GJB/Z594A-2000 metal deposits and cover layer thickness Series selection principle
GJB597 microcircuit General specification
HB0-44-2008 aviation body oxygen and protective life-saving equipment product type designation
HB6-67-2003 aviation instrumentation trademark
HB5870-1985 Air Transport Auxiliary products packaging General technical conditions
HB5888-2008 aviation auxiliary products with fonts and symbols
3 Terms and Definitions
The following terms and definitions apply to this standard.
GB/T 47374-2026 | GB/T 47259-2026 | GB/T 24715-2009 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Similar standards
How to Download GB/T 24714-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 24714-2009
$285.00