GB/T 2467-2008Pyrites and concentrate - Determination of lead content - Flame atomic absorption spectrometric and EDTA volumetric methods (English PDF)

1 Scope

This standard specifies the flame atomic absorption spectrometric and EDTA volumetric method Pyrites and concentrate of lead content.

This standard flame atomic absorption spectrometry applied to the lead content of 0.01% to 1% Pyrites and concentrate products, EDTA content

Method for the determination of Pyrites and concentrate products lead content greater than 0.1%.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

Preparation of GB/T 601 chemical reagent standard titration solution

GB/T 6003.1 woven wire mesh test sieve (GB/T 6003.1-1997, eqv ISO 3310-1.1990)

GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-1992, neq ISO 3696. 1987)

GB/T 9723 Chemicals flame atomic absorption spectrometry General

3 Sample

The sample passes through 150µm test sieve (GB/T 6003.1), at 100 °C ~ 105 °C drying to constant weight, placed in a desiccator, cooled to

Room temperature.

4 General Provisions

The water of this standard shall comply with GB/T 6682 water in three specifications; reagents listed Unless otherwise specified, refer to analytical reagent.

5 Analysis