GB/T 2466-2008Pyrites and concentrate - Determination of copper content - Flame atomic absorption spectrometric and spectrophotometric methods (English PDF)

1 Scope

This standard specifies the flame atomic absorption spectrometry and spectrophotometric determination of pyrite and sulfur concentrate copper content.

This standard applies to pyrite and sulfur concentrate products in the determination of copper content of 0.01% to 1%.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. All dated references, which are subsequently owned

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to reach an agreement based on this standard research

Whether you can use the latest versions of these files. For undated references, the latest version applies to this standard.

GB/T 6003.1 woven wire mesh test sieve (GB/T 6003.1-1997, eqv ISO 3310-1..1990)

GB/T 6682 analytical laboratory water specifications and test methods (GB/T 6682-1992, neq ISO 3696. 1987)

GB/T 9721 chemical reagent molecular absorption spectrophotometry (UV and visible light part)

GB/T 9723 chemical reagent flame atomic absorption spectrometric method

3 sample

The sample was passed 150µm test sieve (GB/T 6003.1), dried at 100 °C ~ 105 °C to constant weight, placed in a desiccator, cooled to

Room temperature.

4 general provisions

The water used in this standard should be consistent with the three water GB/T 6682 specifications; listed reagents except for special provisions, are analytically pure reagents.

5 analytical methods